Lista de Discuss�o Rede Wan - http://www.networkdesigners.com.br

Eduardo,
 
 Calma. Primeiro voc� precisa conseguir a nova vers�o do IOS que voc� deseja. Fale com seu representante comercial Cisco. Segundo, para fazer o upgrade voc� ir� utilizar um servidor de TFTP. Instale um em sua m�quina.
 O procedimento para troca de IOS vai abaixo. Boa sorte.
 
 Att
 
 Wagner Brazil
 Analista de suporte - Proderj/RJ
 
 

PROCEDIMENTO PARA ATUALIZA��O DE VERS�O DE ROTEADORES VIA TFTP

 

 

Antes de executar o procedimento abaixo, certifique-se que o arquivo com a nova vers�o esteja no servidor de TFTP , e anote o nome do arquivo, que ser� solicitado no momento da execu��o do upgrade.

 

1.      Conecte um PC na console do roteador e configure o Hiper-Terminal

 

2.      Entre com a senha de Telnet

 

3.      Digite enable (ENTER) e entre com a senha

 

4.      Digite   copy tftp flash   (ENTER)

 

5.      Neste momento, o roteador ir� solicitar algumas informa��es conforme descrito abaixo:

 

****  NOTICE  ****

Flash load helper v1.0

This process will accept the copy options and then terminate

the current system image to use the ROM based image for the copy.

Routing functionality will not be available during that time.

If you are logged in via telnet, this connection will terminate.

Users with console access can see the results of the copy operation.

                         ---- ******** ----

Proceed? [confirm] (ENTER)

 

System flash directory:

File  Length   Name/status

  1   5190300  igs-inr-l.111-14

[5190364 bytes used, 3198244 available, 8388608 total]

Address or name of remote host [10.30.5.2]? 10.0.240.250 (IP do TFTP Server)

Source file name? c2500-i-l.113-5.t.bin (Nome do arquivo da nova vers�o)

Destination file name [c2500-i-l.113-5.t.bin]? (ENTER)

Accessing file 'c2500-i-l.113-5.t.bin' on 10.0.240.250...

Loading c2500-i-l.113-5.t.bin from 10.0.240.250 (via Ethernet0): ! [OK]

 

Erase flash device before writing? [confirm] (ENTER)

Flash contains files. Are you sure you want to erase? [confirm] (ENTER)

 

System configuration has been modified. Save? [yes/no]: yes

Building configuration...

[OK]

 

Copy 'c2500-i-l.113-5.t.bin' from server

  as 'c2500-i-l.113-5.t.bin' into Flash WITH erase? [yes/no] yes

 

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

 

OBS:             Durante o processo de atualiza��o de vers�o de software, o roteador continua funcionando normalmente, mas n�o � poss�vel se conectar via Telnet.


To unsubscribe, write to [EMAIL PROTECTED]

Responder a