> There should be no problem whatsoever with the module and SMP mode. We run > it here on 4way systems without any problems. What version of the > ServeRAID driver are you using? How did you go about installing the ips.o > for SMP? Are you using the stock Redhat 6.2 SMP kernel (with no mods)? > > Version 4.0 of the ServeRAID driver is available on the IBM website > (www.pc.ibm.com/support). > The ServeRAID should be 3.60.05 if I remember correctly. The ips.o was installed first by just installing the rpm for smp kernel, did not work, and then by compiling as a SMP kernel. Gunnar. > > Hello, > The IBM Serverraid 3L modules ips.o does not seem to work in smp mode. > > The hardware is a IBM Netfinity 5000 with dual 550MHz PIII's. (8659-51Y) > > It works fine in with a single processor kernel but with the smp kernels > provided with RedHat 6.2 the kernel hangs while trying to identify the > scsi devices on bootup. > > Partial bootlog follows: > > scsi : 0 hosts. > scsi : detected total. > md.c: sizeof(mdp_super_t) = 4096 > Partition check: > RAMDISK: Compressed image found at block 0 > autodetecting RAID arrays > autorun ... > ... autorun DONE. > VFS: Mounted root (ext2 filesystem). > scsi0 --- Here it hangs. > > At one time the bootup continued one step further but it claimed to have > found a printer with garbled MODEL: info. > Any info? -- To unsubscribe: mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
