Mark Malecha wrote:
>
> Jacek Andreas Matulla wrote:
> > well I have an AHA 2940 from Adaptec working here with a RH 4.2.
> >
> > Everytime on boot the SCSI bus is reset. This will take some seconds....is
> > there a way to deactivate this reset...? Is it neccessary to reset the SCSI
> > bus...?
>
> Add:
>
> append="aic7xxx=no_reset"
>
> under respective image in /etc/lilo.conf and run /sbin/lilo.
As of the aic7xxx driver version 5.0.18 and above, this option no longer
exists. If you don't do negotiation on the very first command sent (which
we no longer do for other reasons) then you *must* reset the bus at startup.
--
Doug Ledford <[EMAIL PROTECTED]>
Opinions expressed are my own, but
they should be everybody's.
NOTE: I'm just now starting to recover from the Linux-Expo. Most
importantly, I'm just now getting around to answering a lot
of my email. So, if your message has lain around un-answered
for many days, I apologize.
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
