If it's a NE2000 PCI clone do the following command for indenfication of
your
network card. "cat /proc/pci | more" . Look for networkcard or NE2000
Compatible It
will give you your card's configuration. Remember it, you will need it.
Than use the
network configuration program in X Window or manually vi the
/etc/modules.conf yourself (you'll have to do this automaticly later
on). After configuring your network card, vi the /etc/modules.conf and
put the following after the line where it says ne2000. The card's
configuration is what you must put after the line so, io=0x???? irq=?.
I had the same problem with my Winbond NE2000 PCI clone it was io=0x9600
and
irq=9. Save your file and reboot! And if all goes well, it will find
your card.
Signed,
Niels Wagenaar
===============================================
A DOS/Linux C/C++,PASCAL developer and a commercial Visual Foxpro 5.0
Win32-developer at the Dieke & v.d. Beek IT group. If you want to
contact me
or send me a message then send mailto:[EMAIL PROTECTED]
===============================================
> -----Oorspronkelijk bericht-----
> Van: Crucial Lloyd [SMTP:[EMAIL PROTECTED]]
> Verzonden: zondag 14 juni 1998 3:49
> Aan: [EMAIL PROTECTED]
> Onderwerp: NE2000 network card
>
> greetings:
> I have Linux 5.0 on a pentium 200MMX system and Iam trying
> to
> install a NE2000 clone network card with much difficulty. I checked
> the FAQ
> and it said that there is a problem with some of the NE2000 cards.
>
> Anyone know of a work around?
>
>
> Chicago Massive tune in to Cool Runnings with Crucial Lloyd and Ms
> Irie
> 5:00-6:30 PM every Tuesday on WHPK 88.5FM. Cyberspace visit our web
> site at
> http://coolcrew.com/
>
>
> --
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST
> ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips
> /mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
