I just had to install the same type card myself. You may need to do a DOS
boot so that you can run whatever software came with your card in order to
change it's IRQ... unless it has jumpers on the card where you can set the
IRQ manually.
FWIW,
Beth Gemeny
SysAdmin
HHN
-----Original Message-----
From: Crucial Lloyd [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 15, 1998 11:01 PM
To: [EMAIL PROTECTED]
Subject: NE2000 clone
Help!!!!
I am having problem instaling a NE2000 clone ethernet card. I tried
several suggestions that I got from the mail list and now I discover that
that I have an irq conflict. The info showed when I type cat /proc/pci
that the ethernet card is using io=0x6400, irq=11 and my usb port is using
the same irq. Do you have any suggestion as to how I can resolve this
conflict.
Chicago Massive tune in to Cool Runnings with Crucial Lloyd and Ms Irie
5:00-6:30 PM every Tuesday on WHPK 88.5FM. Cyberspace visit our web site at
http://coolcrew.com/
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
