no problem...will do!
Jann
Jann Linder
Web Developer/CH2M Hill - SFO
[EMAIL PROTECTED]
Home Page:
http://www.jann.com/
CalendarPlus Web Site:
http://www.calendarplus.com/
-----Original Message-----
From: Gary Neff [SMTP:[EMAIL PROTECTED]]
Sent: Saturday, June 06, 1998 3:52 PM
To: [EMAIL PROTECTED]
Subject: RE: pasv command using ip-masquerading
you know I just had the same problem I tested all my programs but not ftp I
have the same problem if you do find out let me know PLEASE and likewise
will send to you
> -----Original Message-----
> From: Jann Linder [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, June 06, 1998 6:43 PM
> To: 'Gary Neff'
> Subject: RE: pasv command using ip-masquerading
>
>
> that is what i did--but when ftp-ing from a client on the masq
> network, the
> ftp site that i am connecting to says "cannot open port" when i
> ls or get,
> etc...
>
> Jann
>
>
> Jann Linder
> Web Developer/CH2M Hill - SFO
> [EMAIL PROTECTED]
> Home Page:
> http://www.jann.com/
> CalendarPlus Web Site:
> http://www.calendarplus.com/
>
>
> -----Original Message-----
> From: Gary Neff [SMTP:[EMAIL PROTECTED]]
> Sent: Saturday, June 06, 1998 3:38 PM
> To: [EMAIL PROTECTED]
> Subject: RE: pasv command using ip-masquerading
>
> I am sorry but I didnt have to do any of that I used the red hat 5 version
> and changed a few settings in network and ran ipfwadm to enable ip
> masquerade I can send you the web page if you drop me a note
>
> > -----Original Message-----
> > From: Jann Linder [mailto:[EMAIL PROTECTED]]
> > Sent: Saturday, June 06, 1998 6:14 PM
> > To: 'mel kravitz'; 'masq'; 'linux-net'; '[EMAIL PROTECTED]'
> > Subject: RE: pasv command using ip-masquerading
> >
> >
> > You know? I DID! but it doesn't cover everything...
> >
> > I simply asked how to enable pasv on a host.
> >
> > I loaded the redhat RPM version of the kernel and modules which have IP
> > MASQ enabled...and do NOT know squat about the io module for it.
> >
> > I wanted to know if there is a way to enable pasv on a ftp server
> > when you
> > are connected to it via the command line..that is all. Is it
> too much to
> > ask to get poeple's input? I have answered enough questions here
> > NOT to be
> > told to RTFM or RTFHOWTO
> >
> > Jann
> >
> >
> > Jann Linder
> > Web Developer/CH2M Hill - SFO
> > [EMAIL PROTECTED]
> > Home Page:
> > http://www.jann.com/
> > CalendarPlus Web Site:
> > http://www.calendarplus.com/
> >
> >
> > -----Original Message-----
> > From: mel kravitz [SMTP:[EMAIL PROTECTED]]
> > Sent: Saturday, June 06, 1998 1:38 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: pasv command using ip-masquerading
> >
> > Jann Linder wrote:
> > >
> > > I got ip-masq up and operational...but port commands fail when
> > doing ftp
> > commadns...
> > >
> > > someone told me to use pasv on the servers....but when i type
> > remotehelp
> > pasv on those servers, it responds with
> > > PASV sets server to passive mode
> > >
> > > then i type
> > > pasv on
> > >
> > > and get the same response.
> > >
> > > how do i enable pasv mode on ftp servers and do i have to do it with
> > every command i use on that server...ie:
> > >
> > > Jann Linder
> > > Web Developer/CH2M Hill - SFO
> > > [EMAIL PROTECTED]
> > > Home Page:
> > > http://www.jann.com/
> > > CalendarPlus Web Site:
> > > http://www.calendarplus.com/
> > >
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe
> linux-net" in
> > > the body of a message to [EMAIL PROTECTED]
> > read the masq Howto:-))
> >
> >
> > --
> > PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST
> ARCHIVES!
> > http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips
> > /mailing-lists
> > To unsubscribe: mail [EMAIL PROTECTED] with
> > "unsubscribe" as the Subject.
> >
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
For daily digest info, email [EMAIL PROTECTED]
