[EMAIL PROTECTED] said:
> Vendor: QUANTUM Model: VIKING 4.5 WSE Rev: 880R
> Type: Direct-Access ANSI SCSI revision: 02
> Detected scsi disk sda at scsi0, channel 0, id 3, lun 0
> scsi : detected 1 SCSI disk total.
> SCSI device sda: hdwr sector= 512 bytes. Sectors= 8899737 [4345 MB] [4.3
You're correct that you're being properly recognized. The device names for
scsi devices is similar to those for IDE devices, with a lead "flag" of "sd".
Thus, the first device in your chain will be "/dev/sda", followed by b, c, etc.
This is shown in the bottom line which states:
SCSI device sda: ...
If this is the only scsi device on the chain, you may have better success by
resetting the ID on the from 3 to 0 or 1 for your boot device.
Be a good idea to read the SCSI HOWTO.
Best
rickf
--
Rick Forrister <[EMAIL PROTECTED]>
Opera: Greek word meaning "death by music".
--Anonymous
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
