Hello --- I have reconfigured my system with a new PII board and CPU. In addition I added a Golen sound card and a Jaz Scsi adaptor card , both of which are plug and play ... At boot up the jaz adaptor is recognized and is located at port DE00, IRQ 10, and ID 7. I placed these parameters in my lilo configuration file using.. append aha152x=0xDE00,10,7 replacing the old values that I had for the Zip drive. At boot I get a bunch of timeout errors specifically I get the following attached dmesg. Please help if you can..... This is the last thing I need to get working before I completely remove Windows from my systems..... And I really want to get rid of windows. Of course I did compile the kernal for scsi support. If someone has the time to help me out I, maybe we could continue the thread off the list. Thanks .....
Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) Calibrating delay loop.. ok - 233.47 BogoMIPS Memory: 63120k/65536k available (760k kernel code, 384k reserved, 1272k data) Swansea University Computer Society NET3.035 for Linux 2.0 NET3: Unix domain sockets 0.13 for Linux NET3.035. Swansea University Computer Society TCP/IP for NET3.034 IP Protocols: ICMP, UDP, TCP Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Linux version 2.0.27 ([EMAIL PROTECTED]) (gcc version 2.7.2.1) #1 Sun Jan 18 17:09:35 PST 1998 Serial driver version 4.13 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16550A tty01 at 0x02f8 (irq = 3) is a 16550A tty02 at 0x03e8 (irq = 4) is a 16550A lp1 at 0x0378, (polling) Ramdisk driver initialized : 16 ramdisks of 4096K size hda: SAMSUNG PLS-31274A, 1213MB w/256kB Cache, LBA, CHS=616/64/63 hdb: WDC AC22100H, 2014MB w/128kB Cache, LBA, CHS=1023/64/63 hdc: FX001DE, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 Floppy drive(s): fd0 is 1.44M Started kswapd v 1.4.2.2 FDC 0 is a post-1991 82077 md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8 linear personality registered aha152x: processing commandline: aha152x: <NULL> aha152x: invalid line (controller=1) ok aha152x: BIOS test: passed, detected 1 controller(s) aha152x0: vital data: PORTBASE=0xde00, IRQ=10, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled aha152x: trying software interrupt, lost. aha152x: IRQ 10 possibly wrong. Please verify. scsi0 : Adaptec 152x SCSI driver; $Revision: 1.18 $ scsi : 1 host. scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 5, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 5, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 Test Unit Ready 00 00 00 00 00 scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 Test Unit Ready 00 00 00 00 00 scsi : detected total. PPP: version 2.2.0 (dynamic channel allocation) TCP compression code copyright 1989 Regents of the University of California PPP Dynamic channel allocation code copyright 1995 Caldera, Inc. PPP line discipline registered. Partition check: hda: hda1 hdb: hdb1 hdb2 hdb3 VFS: Mounted root (ext2 filesystem) readonly. Adding Swap: 52412k swap-space Swansea University Computer Society IPX 0.34 for NET3.035 IPX Portions Copyright (c) 1995 Caldera, Inc. Appletalk 0.17 for Linux NET3.035 Appletalk 0.17 for Linux NET3.035 registered device ppp0
