I recently installed a Zip Zoom adapter for my SCSI external Zip drive
I have rebuilt the kernel making sure SCSI support is installed.
I am runing RH5.0 kernel 2.0.32. Currently I'm using a monolithic
kernel.
The problem is I can't get my SCSI Zip drive to be reognized. Enclosed
is
a portion of my dmesg output. Also the zip drive works fine under
Windoze
linear personality registered
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x140, IRQ=9, SCSI ID=7,
reconnect=enabled, parity=enabled, synchronous=disabled, delay=100,
extended translation=disabled
aha152x: trying software interrupt, lost.
aha152x: IRQ 9 possibly wrong. Please verify.
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.18 $
scsi : 1 host.
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 5,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 5,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : detected total.
tunnel: version v0.2b2
Equalizer1996: $Revision: 1.9 $ $Date: 1996/10/12 11:14:37 $ Simon Janes
([EMAIL PROTECTED])
I appreciate any help on figuring this out, as I am almost ready to give
up hope.
Thanks in advance,
-John N Derr
[EMAIL PROTECTED]
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
