El 20 Mar 98 a las 10:39, [EMAIL PROTECTED] escribio:
> Hi everyone,
>
> I have a real strange problem to ask some advise on. First off I
> have Redhat 5.0 running at home (I am at work on a windoze machine),
> on a AMD p90. Recently I have been trying to recompile my kernal.
> I run xconfig and go through the setup with out any problems. After
> saving and exiting that, I do a make clean and make depend (it might
> be dep, which ever I don't get any errors with it). I will then try
> to do a make boot and one of two things happens:
>
> 1. It starts up working on init/main.o - but it just stops there (I
> mean for over a half hour using 0 cpu cycles - Ok, it hangs)
>
> 2. I get a segmentation fault followed by "cpp: output pipe has
> been closed". Hitting return gives me back the prompt.
>
I'm having the same problem, I have a RH 4.2 and this is what I get:
make zImage
gcc -D__KERNEL__ -I/usr/src/linux-2.0.33/include -Wall
-Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strength-reduce
-pipe -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2
-DCPU=586 -c -o init/main.o init/main.c
make: *** [init/main.o] Segmentation fault (core dumped)
Could anybody tell me, where am I Failing? or where to read about
this? I've already read the Kernel-HOWTO.
Thanks in advance...
J. Carlos Cristobal
Mexico, D.F.
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
