It worked fine when I set my HW clock to GMT, and timezone
to GMT-2. And can't understand why, but as long as it works!!!
At 21:33 01.04.98 +0100, you wrote:
>Hans Sandsdalen <[EMAIL PROTECTED]> writes:
>
>> Hello
>>
>> I installed BRU2000 last week, and tried it out. It worked out fine, but
>> when I should tune it this monday (and still) I get this error:
>>
>> bru: [E134] internal error 100 - failed self consistency and portability
>> checks
>>
>> I have installed new versions of glibc, libc, portmap and util-linux.
>>
>> Any ideas?
>
>Your clocks have probably changed. I just posted this to someone
>else. See if it works for you.
>
>Note: This person was in Amsterdam rather than Norway.
>
>####################################################################
>
>The simple solution is step 12) below. However you should read the
>message below and follow the part that applies to you.
>
>All timezone changes are made using timeconfig.
>
>I)
>
>If you are _not_ already using glibc-2.0.7-5 from the Red Hat updates
>directory:
>
>1) Make sure your Hardware clock is set to GMT.
>2) Make sure the "Hardware clock set to GMT" option is checked.
>3) Ensure that the Europe/Amsterdam (or CET) timezone is selected
>4) Upgrade to glibc-2.0.7-5 from the Red Hat updates directory
>5) Try Bru
>6) If it doesn't work try swapping the timezone to CET (or
>Europe/Amsterdam)
>7) Try Bru
>8) If it doesn't work goto step 12) in part II
>
>II)
>
>If you are already using glibc-2.0.7-5 from the Red Hat updates
>directory _or_ if you don't want to change your glibc:
>
>9) Make sure your Hardware clock is set to GMT.
>10) Make sure the "Hardware clock set to GMT" option is checked.
>11) Do steps 3) and 5) and if necessary steps 6) and 7) in part I.
>12) If it still doesn't work change your timezone to Etc/GMT+2
>(assuming that you are now 2hrs ahead of GMT)
>
>--
>Eze Ogwuma
>
>
>--
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
>http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
>
>
+----------------------------------------------------+
Hans Sandsdalen Phone Work: +47 77 66 08 09
System Manager Fax: +47 77 65 58 59
Tromsoe - Norway http://www.spacetec.no/~hans/
Kongsberg Spacetec a.s E-mail: [EMAIL PROTECTED]
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
