Goodmorning everybody !
Hi guys!
I have linux 7.0 installed
with all necesarry net-services (ppd, inetd, httpd, snmbd etc) enabled. I have setup neworking options with PCI
Eathernet Card on my system as follows:
============================================================
IP
Netmask
Device/Interface Server Name
============================================================
127.0.0.1 *
Loopback
localhost.localdomain
192.168.0.1 255.255.255.0
eth0
cruiser.co.in
* *
ppp0
*
----------------------------------------------------------------------------------------------------
However, I 've not
defined DNS on my system.
The
Problem:
===========
External modem is working and
queries OK. After setting up dialup account-script, when I am trying to connect
to the internet through kpp and wvdial dialers, the connection goes well
and user and password authentication is performed by ISP's login prompt. The
dialer's log shows connection is stablished. Remote IP and Local IP are
assigned by ISP's server.
After that, when I open
netscape browser, the home-page does not open and reports a TCP/IP error. Any
URL/web address doesn't open and reports the same error. When try host ip of my
ISP, the browser opned the page. But no other IP's are working this way except
for he ISP.
Could any
gentleman pls help me figuring out what is wrong with my configuration and how
to solve this piculiar problem?
My ISP's settings as reported
in Windows-2000 is as follows:
-------------------------------Windows 2000 IP
Configuration
Ethernet adapter Local Area
Connection:
Connection-specific DNS Suffix .
:
Autoconfiguration IP Address. . . : 169.254.28.154 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : PPP adapter Sanchar
Net:
Connection-specific DNS Suffix .
:
IP Address. . . . . . . . . . . . : 61.0.112.32 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 61.0.112.32 -----------------------------------------------------
end ip configs
The booting responses in Linux
by running dmesg are as follows:
-----------------------------------------------------------------------dump
from linux dmesg
Linux version 2.2.16-22 ([EMAIL PROTECTED]) (gcc
version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Tue Aug 22 16:49:06
EDT 2000
Detected 1003793 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2005.40 BogoMIPS Memory: 63888k/66496k available (1048k kernel code, 408k reserved, 1088k data, 64k init, 0k bigmem) Dentry hash table entries: 262144 (order 9, 2048k) Buffer cache hash table entries: 65536 (order 6, 256k) Page cache hash table entries: 16384 (order 4, 64k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Pentium III (Coppermine) stepping 0a Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED]) PCI: PCI BIOS revision 2.10 entry at 0xfb300 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 65536 bhash 65536) Linux IP multicast router 0.06 plus PIM-SM Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=244b PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio hda: SAMSUNG SV4002H, ATA DISK drive hdc: SAMSUNG CD-ROM SC-152B, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: SAMSUNG SV4002H, 38204MB w/1945kB Cache, CHS=4870/255/63 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 2233.041 MB/sec p5_mmx : 2345.436 MB/sec 8regs : 1724.406 MB/sec 32regs : 966.216 MB/sec using fastest function: p5_mmx (2345.436 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 64k freed Adding Swap: 88316k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.232 $ time 16:53:56 Aug 22 2000 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: Intel USB controller: setting latency timer to 0 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: USB new device connect, assigned device number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: Intel USB controller: setting latency timer to 0 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 usb.c: USB new device connect, assigned device number 1 hub.c: USB hub found hub.c: 2 ports detected es1371: version v0.22 time 16:53:18 Aug 22 2000 es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02 es1371: found es1371 rev 2 at io 0xc400 irq 5 es1371: features: joystick 0x0 es1371: codec vendor v (0x838476) revision 9 (0x09) es1371: codec features 18bit DAC 18bit ADC es1371: stereo enhancement: SigmaTel SS3D Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 28M agpgart: agpgart: Detected an Intel i815, but could not find the secondary device. agpgart: no supported devices found. eth0: DC21041 at 0xc000 (PCI bus 2, device 0), h/w address 00:80:c8:7c:d9:ce, and requires IRQ11 (provided by PCI BIOS). de4x5.c:V0.544 1999/5/8 [EMAIL PROTECTED] CSLIP: code copyright 1989 Regents of the University of California PPP: version 2.3.7 (demand dialling) PPP line discipline registered. IrDA (tm) Protocols for Linux-2.2 (Dag Brattli) eth0: media is unconnected, link down or incompatible connection. hdc: ATAPI 52X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.10 ----------------------------------------------------------end
of dump from linux dmesg Thanks in advance.
Best Regards,
Riyaz...
|
- Re: Netscape Browser Not Opening Web-Page Syed Mohammad Riyaz