At 10:55 PM 5/3/98 -0500, Brian C Hand wrote:
>here is a dump of my dmesg
<snip>
>Serial driver version 4.13 with no serial options enabled
>tty00 at 0x03f8 (irq = 4) is a 16550A
>tty01 at 0x02f8 (irq = 3) is a 16550A
>tty03 at 0x02e8 (irq = 3) is a 16550A
This is going to be a problem. Turn off COM2 in your bios.
<snip>
>smc-ultra.c:v2.00 6/6/96 Donald Becker ([EMAIL PROTECTED])
>eth0: SMC Ultra at 0x300, 00 00 C0 81 D0 D4, IRQ 10 memory
>0xcc000-0xcffff.
<snip>
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=20.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=20.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=20.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=20.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=22.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=1897.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=1010.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=20.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=20.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=20.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=20.
>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x2, t=216.
Try turning the memory useage off with the dos driver/utilty disk. Try
pulling the card and set it for one of the presets.
I have about 3 of these cards and have had no major problems with them.
Like I said before keep trying until you get it.
Dan
>
>the lines above indicate that it found the card okay but it is not working
>as evident in the lines above. Any ideas/comments?
>
>Thanks
>Brian
>
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
