You have to care about interrupts given at boot. Try to "cat" the file
/proc/interrupts to see the IRQ on which it is setup the NIC before using
the gnome util then redo it just after using it. If it is changed insert it
into kernel boot parameters.
The 3c509b works in my box with IRQ 9 while the RH set it on the 11 and it
didn't work.
Hope this helps.
Regards, Nicola.
> -----Messaggio originale-----
> Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Inviato: venerd́ 12 novembre 1999 21.56
> A: [EMAIL PROTECTED]
> Oggetto: rh 6.1 3c509b
>
>
>
>
> Red Had 6.1 is not working w/ 3c509b NIC ( works OK under
> windows ), and
> running linuxconf to configure it manually gives core dump.
> configuring
> using
> network control panel under GNOME seems to go OK, but it fails to
> initialize the card
> at bootup. Any ohter sugestions on getting the card
> operational ? THis is
> on a IBM
> P133. Thanks
>
>
>
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.
>
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
