eth2 is a block of 8 ips from my isp.
i'm running a small webserver, mailserver,
off of these 207.113.56.128-135
my internal network all point to
192.168.230.1 as the gateway.
would i repoint them to 192.168.231.1
if so, what happens to 230.1 ?
On Tue, 16 Nov 1999, Steve Borho wrote:
> On Tue, Nov 16, 1999 at 04:05:27PM -0800, Steve Lee wrote:
> > after that how do i setup up some of the settings.
> > here is a list of my ifconfig. though pretty long.
> > sorry. then i would setup eth1 as 231.1 and
> > how would the nic work after this? what settings
> > do i setup. ipmasq is running, forward too.
> >
> > eth0 Link encap:Ethernet HWaddr 00:40:05:A0:54:67
> > inet addr:192.168.230.1 Bcast:192.168.230.255
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:5202 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:9353 errors:1 dropped:0 overruns:0 carrier:1
> > collisions:0 txqueuelen:100
> > Interrupt:11 Base address:0xc800
>
> Internal LAN 1, ok.
>
> > eth1 Link encap:Ethernet HWaddr 00:40:05:A0:54:66
> > inet addr:192.168.230.2 Bcast:192.168.230.255
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:2004 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:98 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:100
> > Interrupt:5 Base address:0xcc00
>
> Internal LAN 2, ok. Change this card's IP address to 192.168.231.1, and
> all the machines on this network should be given 192.168.231.x addresses
> and told to use 192.168.231.1 as their default gateway.
>
> > eth2 Link encap:Ethernet HWaddr 00:40:95:E2:41:EB
> > inet addr:207.113.56.129 Bcast:207.113.56.135
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:479130 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:57574 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:1 txqueuelen:100
> > Interrupt:15 Base address:0x360
>
> ADSL connection (bridging, I assume)
>
> > eth2:1 Link encap:Ethernet HWaddr 00:40:95:E2:41:EB
> > inet addr:207.113.56.130 Bcast:207.113.56.135
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > Interrupt:15 Base address:0x360
> <snip>
>
> What are all these aliases for? Are you pretending to be a whole bunch of
> machines?
>
> Give me some idea of what your intentions are, and I can help you better.
>
> --
> Steve Borho
>
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.
>
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
