That's exactly what mine does too: same kernel, but a CDRW instead. On the
bright side, it does burn CD's though. I would like to know why it's doing
this and if there's a way to stop it other than sending kernel logging to a
file and ignoring it.
IIRC, one thing I did notice is that when I use insmod to force the kernel
to keep sr_mod loaded, that after 30 minutes or so the kernel reports 0 SCSI
devices and then I can no longer access the CDRW as a CDROM. At that point
I have to 'rmmod sr_mod' and then everything is fine again.
Is this normal? Or is it Abbey Normal?
> Subject:
> CDRW and kernel detection
> Date:
> Tue, 15 Feb 2000 16:03:20 -0600
> From:
> Roger Dooley <[EMAIL PROTECTED]>
> To:
> [EMAIL PROTECTED]
>
>
>
> I'm having a slight problem with my CDRW and hopefully someone can help.
> When booting the kernel (2.2.14), I get the following message:
>
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> scsi : 1 host.
> Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
> Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr2 at scsi0, channel 0, id 0, lun 2
> Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr3 at scsi0, channel 0, id 0, lun 3
> Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr4 at scsi0, channel 0, id 0, lun 4
> Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr5 at scsi0, channel 0, id 0, lun 5
> Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr6 at scsi0, channel 0, id 0, lun 6
> Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr7 at scsi0, channel 0, id 0, lun 7
> Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr8 at scsi0, channel 0, id 1, lun 0
> Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr9 at scsi0, channel 0, id 1, lun 1
> Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr10 at scsi0, channel 0, id 1, lun 2
> Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr11 at scsi0, channel 0, id 1, lun 3
> Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr12 at scsi0, channel 0, id 1, lun 4
> Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr13 at scsi0, channel 0, id 1, lun 5
> Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr14 at scsi0, channel 0, id 1, lun 6
> Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr15 at scsi0, channel 0, id 1, lun 7
> scsi : detected 16 SCSI cdroms total.
> sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> Uniform CDROM driver Revision: 2.56
> sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> sr2: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> sr3: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> sr4: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> sr5: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> sr6: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> sr7: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> sr8: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> sr9: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> sr10: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> sr11: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> sr12: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> sr13: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> sr14: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> sr15: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
>
> The kernel detects 16 scsi devices, but I have only a dvd-rom and a
> cd-rom attatched. Has anyone seen this before. I have figured out how to
> mount them, but it's very annoying.
>
> TIA,
> Roger Dooley
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
