Hi
Attached hereto please find the xoutput.txt file
Thanks
B.R.
Stephen Liu
----- Original Message -----
From: "gpt Guillermo Pastor Torrente" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 28, 2000 7:37 PM
Subject: Re: Installation of Voodoo 2/Banshee AGP graphic card
> A Tue, 28 Mar 2000, Stephen Liu va escriure:
> >
> > "X11 TransSocket Unix connect : can't connect : errno=111"
>
> Mmm, I'm not sure.... but this could be due to a wrong mouse
configuration.
> Please include full report.
>
> $startx > file.txt
>
> or sth like that.
XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.1-ac1 i686 [ELF]
Configured drivers:
VGA16: server for 4-bit colour VGA (Patchlevel 0):
ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c,
ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
ET4000W32p_rev_d, ET6000, ET6100, et3000, ncr77c22, ncr77c22e, ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c,
tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr,
tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi,
cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382,
cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975, 3dimage985,
oti067, oti077, oti087, oti037c, cl6410, cl6412, cl6420, cl6440,
generic
MONO: server for interlaced and banked monochrome graphics adaptors
(Patchlevel 0):
hgc1280, sigmalview, apollo9, hercules
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) VGA16: Graphics device ID: "Primary Card"
(**) VGA16: Monitor ID: "Primary Monitor"
(--) VGA16: Mode "800x600" needs hsync freq of 27.66 kHz. Deleted.
(**) MONO: Graphics device ID: "Primary Card"
(**) MONO: Monitor ID: "Primary Monitor"
Warning: The directory "/usr/X11R6/lib/X11/fonts/local" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi"
(--) VGA16: PCI: 3Dfx Banshee rev 3, Memory @ 0xde000000, 0xe6000000, I/O @ 0xd800
(--) VGA16: chipset: generic
(--) VGA16: videoram: 256k (using 256k)
(**) VGA16: clocks: 25.17 28.32 66.82 66.82
(--) VGA16: Maximum allowed dot-clock: 90.000 MHz
(--) VGA16: There is no mode definition named "800x600"
Fatal server error:
No valid modes found.
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.xinit: Connection refused (errno 111): unable to connect to X serverxinit:
No such process (errno 3): Server error.
