Hi,
Why don't you just make sure that the NICs used by
Network A and B are 10baseT and that the NIC used by
Network C is 100baseT? This is a quick and easy
solution...compared to hacking down the MTUs (max
transfer units) utilized by Net A NIC & B NIC--and
making sure that the hack sticks in place.
Bandwidth load balancing is usually controlled between
OSI layers 2 and 3, which means using a switch.
Translation: $$$$$$
HTH,
L.G.
On Tue, 5 Sep 2000, Manohar Pradhan wrote:
> Hi,
>
> I am having few 2 subnets and using a Linux Box as gateway for these
> subnets using 3 NIC cards.
>
> All the users in these subnets go to Internet through this Gateway NIC
> interface.
>
>
> 192.168.1.0 ---------!
> network A
> 192.168.1.1
> ---------- network C
> !Linux Box! 192.168.0.1 ---->external world
> ------ ---
> 192.168.2.1
>
> network B !
> 192.168.2.0 ---------
>
>
> Now I would like to control the bandwidth that can be consumned by
> these two subnets through their respective NIC interfcaces. Could
> anyone give me a hint how to achieve solution for this problem. If
> possible, then I can use my Linux box as real router with total
> bandwidth control.
>
> TIA,
>
> Manohar
>
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
>
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
