I finally got it to install. I made a subsequent post saying that I
actually had the GW set to 192.168.1.1 (rather than the same IP of the
workstation).
Here is how I got it to work:
1. Yanked out the NIC
2. Installed from a boot disk w/ the boot: linux updates option
3. Used the final anaconda updates image
4. Did a "custom" graphical install from the cd (as opposed to network)
5. let it finish
6. powered down
7. Installed the NIC
8. Let RH detect the nic (the netgear 310-tx one)
9. Set up the nic when it prompted me
10. everything was hunky dory.
I didn't try to install without the NIC, directly from the CD (with no
updates). That might still work-
The problem seems to be with the scripts and the network card combo.
Thanks for the help...
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 21, 2000 6:28 AM
To: '[EMAIL PROTECTED]'
Subject: Re: Post Install configuration hang
Jamie,
Where are you in installing Redhat? What stage? And what's up
with this gateway stuff? Will you elaborate?
Best Regards,
L.G.
-- Generated Signature --
Outside of a dog, a book is man's best
friend. Inside of a dog, it is too
dark to read.
-- End Sig --
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
