I'm fairly new to the Linux world, so please bare with me here. I've got
RH 6.2 and I'm trying to setup a NIC that isn't being recognized by Linux.
It's a Linksys EtherFast NIC. According to Lynksys and Support Red Hat
pages, I should be using the tulip driver with the card, no luck. I can
get the Interrupt and IO address from /proc/pci, can I use this information
to configure the driver in netconf? The IRQ is 9 and the IO says : 0xfc00
[0xfc01] (from /proc/pci). When inputing these factors into netconf and
using the tulip driver (manually entering IP information also), the card
still won't work. Doing a tail -f /var/logs/messages gives me an invalid
parm_io message when trying to 'ifup eth0'. Any and all help will be
appreciated.
If I happen to be posting to a mailing list that doesn't handle these
issues, please let me know if there is a better mailing list to post this
to or any pages that specifically handle this problem.
Thanks!
Scott Bowling
PS- Is there a location for me to search the mailing list archives? I had
to go a round about way to find out if this mailing lists exists!
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
