-----Original Message-----
From: David Brett <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Cc: [EMAIL PROTECTED]
<[EMAIL PROTECTED]>; mike allerhand
<[EMAIL PROTECTED]>; Ernie LaBonte <[EMAIL PROTECTED]>;
[EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Thursday, November 09, 2000 2:27 PM
Subject: Re: printing directly to port 9100
>I am having the same problem. I am trying to print to a hp printer with a
>jetDirect card.
>
>Here is the printcap created by the printtool in the control-panel
>
>##PRINTTOOL3## DIRECT ljet4 600x600 letter {} LaserJet4 Default {}
>lp:\
>:sd=/var/spool/lpd/lp:\
>:mx#0:\
>:sh:\
>:af=/var/spool/lpd/lp/acct:\
>:lp=/dev/null:\
>:if=/var/spool/lpd/lp/filter:
>
>What dose not show up here is the ip address, which is correct or the
>port. Here I have tried 9100 and 515 and no port.
>
This works for me at my office. This isn't a jet direct, but works very
similarly. Have you folks used the rm and rp directives? These printers
are essentially remote queues after all. Hope this helps.
##PRINTTOOL3## REMOTE
xerox:\
:sd=/var/spool/lpd/xerox:\
:mx#0:\
:sh:\
:rm=XES.myaddress.com:\
:rp=raw:
Jeff Hogg
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
