"Ashley M. Kirchner" wrote:
> Another question (first one was X Install)... I just installed a
> SCSI tape in this machine (running RH6.2). The system's SCSI card sees
> it, all is well - however:
>
> [root@c41:~]# mt -f /dev/st0 status
> SCSI 2 tape drive:
> File number=-1, block number=-1, partition=0.
> Tape block size 0 bytes. Density code 0x0 (default).
> Soft error count since last status=0
> General status bits on (10000):
> IM_REP_EN
>
> [root@c41:~]# mt -f /dev/st0 retension
> /dev/st0: Input/output error
>
> [root@c41:~]# mt -f /dev/st0 tell
> /dev/st0: Input/output error
>
> Okay. What am I missing?
Only thing I could think of would be IRQ contention. Is there anything
else on IRQ 11?
Jack Bowling
mailto: [EMAIL PROTECTED]
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
