-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Mikkel L. Ellertson
Sent: March 5, 2001 10:27 AM
To: [EMAIL PROTECTED]
Subject: Re: login hangs


On Mon, 5 Mar 2001, Darko Stankovic wrote:

> Hello,
>
> I am having trouble with my red hat 6.0 server, and I hope you can
> help me. The server was working for a couple of months and I have
> not touched it for a while. Then I moved it to a different locatio,
> and booted it with some older monitor. I used cold boot just turning
> off and on machine. Now after it boots, it displays a login prompt
> if I am pfysically by the server and after I type in my login id it
> just hangs there. If I use telnet to connect to it, it makes a
> connection but then it hangs, there is not even a login prompt.
>
> Here are also some services that fail during a boot up that could
> indicate the problem.
>
>:
>
> Mar  1 11:56:56 machine1 syslog: syslogd startup failed
> Mar  1 11:56:56 machine1 remote: fatal: Extra argument start.
> Mar  1 11:56:56 machine1 rc: Starting remote failed
> Mar  1 11:56:56 machine1 rc: Starting service failed
>
> I dont know how to fix this so if you could help me here I would apreciate
> it.
>
> Thanx,
>
> Darko
>
>
Did you do a proper shutdown before moving the machine?  Your
discription of a "cold boot" makes me wonder.  From the sounds of
things, you may have some corrupted files.  But it is hard to say from
the messages.  The machine did a file system check on boot up, right?
Did it report any errors?

As a start to fixing it, try booting into the single user mode.  You
will probably have to use "linux init=/bin/bash" where linux is the
lable for your kernel.  From there, you can run e2fsck manualy, and see
what shape your drives are in.  You can also check /etc/inittab, the
files in /etc/rc.d, and in /etc/rc.d/init.d.  This is a good place to
start.  Find out why syslog, and the other scripts are failing.

If you can not boot into the single user mode, then it is time to use a
resque floppy.  You may end up backing up your data, and upgrading to
6.2, plus updates if the errors are bad enough.

Mikkel
--

    Do not meddle in the affairs of dragons,
 for you are crunchy and taste good with ketchup.

Hello,

Thank you for responding to my message.

Cold boot was turning machine off and on, and not shutting it properly down.
Yes I can login into single user mode no problem. Also at the boot up yes
system did a check on my disks and everything passed fine. I was thinking
about examining it manually, but there were no errors about file systems.
Also I looked at rc.d files and I am not sure how would I find an error
there, it looks fine to me, I mean how would error show in these files as
well as inittab ? To be clearer, how corrupt files would look like ?

Thanx for your help.

Darko



_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list



_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to