I just upgraded one server from RH6.2 to RH7.0 and I'm faced with
this problem:
aha152x: BIOS test: passed, auto configuration: ok, detected 1
controller(s)
aha152x: resetting bus...
aha152x0: vital data: rev=3, io=0x340 (0x340/0x340), irq=11, scsiid=7,
reconnect=enabled, parity=enabled, synchronous=enabled, delay=1000,
extended translation=disabled
aha152x0: trying software interrupt, lost.
aha152x0: IRQ 11 possibly wrong. Please verify.
This card worked fine under RH6.2, nothing has changed on it, no
bios settings, nothing. Yet, it fails. Uh, why? The io address, irq
and scsi is are all correct. And then it says the irq is possibly
wrong? (why doesn't the kernel admit it may be wrong too sometimes?
<grin>)
AMK4
--
W |
| I haven't lost my mind; it's backed up on tape somewhere.
|____________________________________________________________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ashley M. Kirchner <mailto:[EMAIL PROTECTED]> . 303.442.6410 x130
SysAdmin / Websmith . 800.441.3873 x130
Photo Craft Laboratories, Inc. . eFax 248.671.0909
http://www.pcraft.com . 3550 Arapahoe Ave #6
.................. . . . . Boulder, CO 80303, USA
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
