|
This may be the second time I posted so sorry if you see
this twice. I installed a Seagate
Python scsi tape drive into a Redhat 7.1 server. The tape was pulled from an older 6.2
server. The system sees the tape
drive and is shown in the /proc/scsi/0 file. Although it never went
through a configuration menu durring boot up. At first the tape would just hang when I
tried to rewind or backup to it. I’m
using bru for backing up. I would
get the error “device is busy”. If I rebooted the server the /tmp file
would claim to be busy and fail to dismount. If I do a more on the /dev/st0 I get the following message: St0: Error 26030000 (sugg, bt 0x20,
driver bt 0x6, host bt 0.3). Has anyone seen this and have any ideas to get this device
working. I would appreciate any help you can give me. Thanks, |
