One problem I had that I did realize at the time until I traced all my cables to see what the problem was. I realized that I had pluged one of my cables into the port that was shared with the uplink port and a cable in to the uplink port. Once I moved the cable that out of the shared port everything was upand running.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Rodolfo J. Paiz > Sent: Tuesday, March 12, 2002 11:18 AM > To: [EMAIL PROTECTED] > Subject: [OT] Can't see computers on the other switch > > > Hi! > > OT but no idea where else to go... > > I have a home network using two simple desktop switches; one a 4-port > Linksys with 2-port printserver builtin, and the other an 8-port Linksys. > The 4-port's "uplink" connection is used to hook up to a normal > port on the > 8-port, and link lights show up properly when connected or disconnected. > > Machines on each switch can see each other perfectly, but cannot see > machines on the other switch at all, returning "Destination Host > Unreachable" errors. > > Any ideas on what might cause this? I've already tried three known-good > cables, so I doubt that could be the problem... > > > -- > Rodolfo J. Paiz > [EMAIL PROTECTED] > > > > _______________________________________________ > Redhat-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/redhat-list > _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
