I have a new system that includes a DDS4 tape drive. The old system has a DDS tape drive (DDS1 I think). I would like to transfer files (about 5Gb) from the old to new system using tape, but the DDS4 tape drive will not read the DDS tapes ... instead gives me a read error ... "input/output error"
The new system is running RH 7.2. I am using /dev/st0. I used tar to make the tapes (and so use tar to attempt to read them). Also tried cat just to see if I got anything off of the tape ... did not. The new tape drive works fine in terms of writing and then reading back what it wrote. But supposedly DDS4 (and this drive specifically) is backwards compatible with DDS3, 2, 1 ... and so is supposed be able to read older tapes. mt -f /dev/st0 status does indicate that the drive knows it is a DDS tape. The tape contents were compressed by the writing drive (but using the DDS standard compression method). Any suggestions on what to try gratefully appreciated. Thanks Ray Liere [EMAIL PROTECTED] _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
