Make sure you have your firewall set up correctly. To test try the following: ipchains -f
then try and connect. (this will clear your rule set) If it still doesn't work then you have other issues, but I think that should do it. - Matt ----- Original Message ----- From: "Avi Aumick" <[EMAIL PROTECTED]> To: "Redhat-List" <[EMAIL PROTECTED]> Sent: Sunday, June 09, 2002 7:41 PM Subject: probl after upgrading to 7.3 > > Problem 1: > after upgrading to 7.3 I keep getting the following log message on the > server (still running 7.2) > > Jun 9 17:02:14 hostname kernel: Packet log: input DENY eth1 PROTO=17 > xxx.xxx.xxx.xxx:138 yyy.yyy.yyy.255:138 L=241 S=0x00 I=0 F=0x4000 T=64 > (#45) > > xxx.xxx.xxx.xxx is the server ip address and yyy.yyy.yyy.255 is on my > internal network. I know that port 138 is for netbios-dgm. However this > only started once I upgraded my clients to 7.3. > > Problem 2: > Also after upgrading my clients to 7.3, neither of the client pc's are > able to print. On one client I did a brand new install, on the other I did > an upgrade. I am not using cups. The printer is a remote printer to the > clients having its own ip address. I can not even print from the > printtool. > > Any suggestions? Could the problems be related? > > Avram > > -- > ----------- > You know you're getting old when you talk about what > you've done, rather than what you're going to do. > > > > _______________________________________________ > Redhat-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/redhat-list > _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
