When my machine boots I get this;
[Taken from dmesg]
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: ST340810A, ATA DISK drive
hdc: LTN526D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Note the line "Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx"
Should I be setting any idebus parameters somewhere ?
cause the hda line says: "hda: 78165360 sectors (40021 MB) w/2048KiB Cache,
CHS=4865/255/63, UDMA(100)"
which is UDMA 100Mhz...
Is all ok here ??? or should I be settings some parameters to make th
emost of my UDMA 100Mhz drive ?
Thanks
Darryl
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
