I cannot sort out problem with 'cloned' 3com dev after kernel upgrade on HP
LH4 Netserver. Everything works fine up to v2.4.9-13 but after clean
upgrade to 2..9-34 my legacy SINGLE 3c9005 is listed TWICE (and other
tested in this, and other slots!!) :
[root]# lspci -v -s 1:4
01:04.0 Ethernet controller: 3Com Corporation 3c900B-Combo [Etherlink XL
Combo] (rev 04)
Subsystem: 3Com Corporation 3C900B-Combo Etherlink XL Combo
Flags: bus master, medium devsel, latency 80, IRQ 11
I/O ports at 1080 [size=128]
Memory at 10000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
01:04.0 Ethernet controller: 3Com Corporation 3c900B-Combo [Etherlink XL
Combo] (rev 04)
Subsystem: 3Com Corporation 3C900B-Combo Etherlink XL Combo
Flags: bus master, medium devsel, latency 80, IRQ 11
I/O ports at a000 [size=128]
Memory at e8100000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
so, there are problems with resource allocation (mesg), and then, it is NOT
WORKING at all !
Have you any ideas?
regards
jkk
*****************************************************
* jan k.kaminski, nucl.med.dept, med.univ. of lodz *
* pgpkey http://w4u.am.lodz.pl/~jkk/ *
***** BC02 E8F1 7FAE 1138 9182 F56D BC5A 4059 ******
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
