I am running RH 7.3 on a new machine and am having trouble with no sound and HD performance. I'm running the stock 2.4.18-5 kernel. The MB is an Intel D845EBG2 running a P4 2.26GHz. Are these problem caused by lack of support for this MB?
TIA! Gerard Disk is a Maxtor 80GB ATA133. hdparm shows the following: /dev/hda: multcount = 16 (on) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 9732/255/63, sectors = 156355584, start = 0 busstate = 1 (on) Note, no 32bit support, no unmasking of interrupts, no dma support. I cannot set dma either. It reports: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) On sound, it is enabled on the MB. KDE reports no such device (/dev/dsp) and says it will continue with the null device. /var/log/messages shows: Jul 16 20:15:14 server kernel: i810: Intel ICH4 found at IO 0xe080 and 0xe400, IRQ 11 Jul 16 20:15:15 server insmod: /lib/modules/2.4.18-5/kernel/drivers/sound/i810_audio.o: init_module: No such device Jul 16 20:15:15 server insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Jul 16 20:15:15 server insmod: /lib/modules/2.4.18-5/kernel/drivers/sound/i810_audio.o: insmod sound-slot-0 failed Jul 16 20:15:15 server kernel: i810_audio: Audio Controller supports 6 channels. Jul 16 20:15:15 server kernel: i810_audio: Primary codec not ready. Jul 16 20:15:15 server modprobe: modprobe: Can't locate module sound-service-0-3 Jul 16 20:17:34 server kernel: Intel 810 + AC97 Audio, version 0.21, 15:37:53 Jun 10 2002 _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
