ummm, I tried mii-tool and I get: SIOCGMIIPHY on 'eth0' failed. Operation not supported. SIOCGMIIPHY on 'eth1' failed. Operation not supported. SIOCGMIIPHY on 'eth2' failed. Operation not supported. all three are 3C905-TX/TX-M's. drats! But on another system: eth0: negotiated 100baseTx-FD, link-ok eth0: negotiated 100baseTx-FD, link-ok eth0: negotiated 100baseTx-FD, link-ok all three are 3C905-TX. nice. Now I'm more aware on ethernet cards. smbinyon
-----Original Message----- From: Cristian Grigoriu [mailto:[EMAIL PROTECTED]] Sent: Friday, September 27, 2002 1:22 PM To: [EMAIL PROTECTED] Subject: Re: How to find out capacity of an Interface From: <[EMAIL PROTECTED]> > mii-diag is new to me, is it something I can download ? > Usually I check the settings on my nics using mii-tool. I'm sorry, I meant mii-tool. mii-diag doesn't even exist. Grig -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
