My NTP server works nicely... here is our ntp.conf file. We do not use authentication though... I believe this is a pretty standard 7.2 or 7.3 Red Hat conf.
On a 2000 box, at the command line type net time /setsntp:<serverip> and make sure the Windows Time Service is started, too! james # Prohibit general access to this service. restrict default ignore # Permit all access over the loopback interface. This could # be tightened as well, but to do so would effect some of # the administrative functions. restrict 127.0.0.1 # -- CLIENT NETWORK ------- # Permit systems on this network to synchronize with this # time service. Do not permit those systems to modify the # configuration of this service. Also, do not use those # systems as peers for synchronization. # restrict 192.168.1.0 mask 255.255.255.0 notrust nomodify notrap # your own here # --- OUR TIMESERVERS ----- # or remove the default restrict line # Permit time synchronization with our time source, but do not # permit the source to query or modify the service on this system. # restrict mytrustedtimeserverip mask 255.255.255.255 nomodify notrap noquery # server mytrustedtimeserverip # your own here # --- NTP MULTICASTCLIENT --- #multicastclient # listen on default 224.0.1.1 # restrict 224.0.1.1 mask 255.255.255.255 notrust nomodify notrap # restrict 192.168.1.0 mask 255.255.255.0 notrust nomodify notrap # --- GENERAL CONFIGURATION --- # # Undisciplined Local Clock. This is a fake driver intended for backup # and when no outside source of synchronized time is available. The # default stratum is usually 3, but in this case we elect to use stratum # 0. Since the server line does not have the prefer keyword, this driver # is never used for synchronization, unless no other other # synchronization source is available. In case the local host is # controlled by some external source, such as an external oscillator or # another protocol, the prefer keyword would cause the local host to # disregard all other synchronization sources, unless the kernel # modifications are in use and declare an unsynchronized condition. # server 127.127.1.0 # local clock fudge 127.127.1.0 stratum 10 # # Drift file. Put this in a directory which the daemon can write to. # No symbolic links allowed, either, since the daemon updates the file # by creating a temporary in the same directory and then rename()'ing # it to the file. # driftfile /etc/ntp/drift broadcastdelay 0.008 # # Authentication delay. If you use, or plan to use someday, the # authentication facility you should make the programs in the auth_stuff # directory and figure out what this number should be on your machine. # authenticate no # # Keys file. If you want to diddle your server at run time, make a # keys file (mode 600 for sure) and define the key number to be # used for making requests. # # PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote # systems might be able to reset your clock at will. Note also that # ntpd is started with a -A flag, disabling authentication, that # will have to be removed as well. # #keys /etc/ntp/keys -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
