>I'm not sure I follow, but are you using the ALSA drivers? No, I believe it's the OSS driver. The line I have in my modules.conf is: Alias sound-slot-0 es1371
This checks out as the appropriate driver for the card. >They default to muted settings. >Volume settings should be saved on shutdown, That was my understanding as well. It appears as though all inputs are being muted whenever I start an X session and not otherwise being saved between sessions. >unless you removed the relevant lines from /etc/modules.conf: >post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L > >/dev/null 2>&1 || : >pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S > >/dev/null 2>&1 || : Those lines are intact. This is from a fresh installation (and my third try at fixing it) and I haven't touched modules.conf. >Open your mixer, and mark the line in port for recording. >By default, the mic port is used for the recording source. I had the line input selected for recording right from the start... No go. -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
