At 12:54 AM 12/16/02 +0000, you wrote:
Hi,
Dec 14 I used xcdroast 0.98alpha10 to rip all 13 audio-tracks from an
audio-CD to /tmp.
When I tried to write them to a CD-RW the writing was unsuccessful after
a couple of tracks. (Unfortunately the output of xcdroast that I saved
seems pretty useless to me, but if someone wants to have a look at it
just let me know)
Today (Dec 15) I downloaded and installed the following rpms:
[root@localhost rpms]# rpm -Uvh cdrtools-cdda2wav-1.11a40-1.i386.rpm
[root@localhost rpms]# rpm -Uvh cdrtools-cdrecord-1.11a40-1.i386.rpm
[root@localhost rpms]# rpm -Uvh cdrtools-devel-1.11a40-1.i386.rpm
[root@localhost rpms]# rpm -Uvh cdrtools-mkisofs-1.11a40-1.i386.rpm
[root@localhost rpms]# rpm -Uvh xcdroast-0.98alpha11-1.i386.rpm
I renewed my setup and tried to write the audio-traks to the same CD-RW
(after blanking it).
I disabled the 'eject when done' function during blanking and again
during writing.
I closed xcdroast after the writing was done (which xcdroast reported to
be successful) but ever since I have been unable to exit the CD from the
cd-writer.
At first dmesg reported many lines like:
SCSI host 0 abort (pid 598828) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 598832, scsi0, channel 0,
id 1, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
SCSI host 0 abort (pid 598832) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 598828, scsi0, channel 0,
id 1, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
and every once in a while:
SCSI bus is being reset for host 0 channel 0.
hdd: ATAPI reset timed-out, status=0xff
ide1: reset: success
scsi : aborting command due to timeout : pid 598832, scsi0, channel 0,
id 1, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
SCSI host 0 abort (pid 598832) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 598828, scsi0, channel 0,
id 1, lun 0 Prevent/Allow Medium Removal 00 00 00 00 00
SCSI host 0 abort (pid 598828) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: status timeout: status=0xff { Busy }
hdd: drive not ready for command
hdd: status timeout: status=0xff { Busy }
hdd: drive not ready for command
scsi : aborting command due to timeout : pid 598832, scsi0, channel 0,
id 1, lun 0 Prevent/Allow Medium Removal 00 00 00 01 00
SCSI host 0 abort (pid 598832) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
during this X locked up every minute or so for about 10 seconds.
This continued for several hours after which the following processes where running on my box:
[M8ram@localhost M8ram]$ ps -aux
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.1 1312 428 ? S Dec12 0:08 init [5]
root 2 0.0 0.0 0 0 ? SW Dec12 0:00 [keventd]
root 3 0.0 0.0 0 0 ? SW Dec12 0:02 [kapmd]
root 4 0.0 0.0 0 0 ? SWN Dec12 0:04 [ksoftirqd_CPU0]
root 5 0.0 0.0 0 0 ? SW Dec12 0:03 [kswapd]
root 6 0.0 0.0 0 0 ? SW Dec12 0:00 [bdflush]
root 7 0.0 0.0 0 0 ? SW Dec12 0:02 [kupdated]
root 8 0.0 0.0 0 0 ? SW Dec12 0:00 [mdrecoveryd]
root 12 0.0 0.0 0 0 ? SW Dec12 0:20 [kjournald]
root 91 0.0 0.0 0 0 ? SW Dec12 0:00 [khubd]
root 248 0.0 0.0 0 0 ? SW Dec12 0:00 [kjournald]
root 723 0.0 0.1 1416 420 ? S Dec12 0:00 /sbin/pump --lookup-hostname -i eth0
root 775 0.0 0.1 1364 504 ? S Dec12 1:09 syslogd -m 0
root 780 0.0 0.1 1300 428 ? S Dec12 0:42 klogd -x
root 855 0.0 0.1 1296 408 ? S Dec12 0:00 /usr/sbin/apmd -p 10 -w 5 -W -P /etc/sysconfig/apm-scripts/apmscript
root 909 0.0 0.3 2572 772 ? S Dec12 0:00 /usr/sbin/sshd
root 942 0.0 0.2 2036 620 ? S Dec12 0:00 xinetd -stayalive -reuse -pidfile /var/run/xinetd.pid
lp 964 0.0 0.3 2900 796 ? S Dec12 0:00 lpd Waiting
root 986 0.0 0.3 2360 956 ? S Dec12 0:00 /bin/sh /usr/bin/safe_mysqld --defaults-file=/etc/my.cnf
mysql 1028 0.0 0.2 27852 664 ? S Dec12 0:00 /usr/libexec/mysqld --defaults-file=/etc/my.cnf --basedir=/usr --datadir=/var/
mysql 1030 0.0 0.2 27852 664 ? S Dec12 0:02 /usr/libexec/mysqld --defaults-file=/etc/my.cnf --basedir=/usr --datadir=/var/
mysql 1031 0.0 0.2 27852 664 ? S Dec12 0:00 /usr/libexec/mysqld --defaults-file=/etc/my.cnf --basedir=/usr --datadir=/var/
mysql 1032 0.0 0.2 27852 664 ? S Dec12 0:00 /usr/libexec/mysqld --defaults-file=/etc/my.cnf --basedir=/usr --datadir=/var/
root 1033 0.0 0.9 12780 2428 ? S Dec12 0:04 /usr/bin/spamd -d -c -a
junkbust 1081 0.0 0.1 1676 356 ? S Dec12 0:00 /usr/sbin/junkbuster /etc/junkbuster/config
root 1100 0.0 0.1 1340 420 ? S Dec12 0:14 gpm -t imps2 -m /dev/mouse
root 1118 0.0 0.2 1464 556 ? S Dec12 0:00 crond
xfs 1228 0.0 2.2 9072 5712 ? S Dec12 0:18 xfs -droppriv -daemon
daemon 1264 0.0 0.1 1344 488 ? S Dec12 0:00 /usr/sbin/atd
root 1282 0.0 3.7 13452 9636 ? S Dec12 0:06 /usr/sbin/rcd
root 1291 0.0 0.1 1280 340 tty1 S Dec12 0:00 /sbin/mingetty tty1
root 1292 0.0 0.1 1280 340 tty2 S Dec12 0:00 /sbin/mingetty tty2
root 1293 0.0 0.1 1280 340 tty3 S Dec12 0:00 /sbin/mingetty tty3
root 1294 0.0 0.1 1280 340 tty4 S Dec12 0:00 /sbin/mingetty tty4
root 1295 0.0 0.1 1280 340 tty5 S Dec12 0:00 /sbin/mingetty tty5
root 1296 0.0 0.1 1280 340 tty6 S Dec12 0:00 /sbin/mingetty tty6
root 1297 0.0 0.2 2340 572 ? S Dec12 0:00 /usr/bin/kdm -nodaemon
root 1306 0.1 13.0 107848 33160 ? SL Dec12 6:13 /usr/X11R6/bin/X -auth /var/run/xauth/A:0-57BFCF
M8ram 4680 0.0 1.2 5112 3304 ? S Dec13 0:04 oafd --ac-activate --ior-output-fd=15
root 4782 0.0 0.0 0 0 ? SW Dec13 0:00 [eth0]
root 7066 0.0 0.0 0 0 ? SW Dec13 0:00 [scsi_eh_1]
root 4208 0.0 0.5 3184 1336 ? S Dec15 0:00 -:0
M8ram 4910 0.0 1.7 7604 4492 ? S Dec15 0:00 gnome-session
M8ram 4961 0.0 0.1 1640 472 ? S Dec15 0:00 esd -terminate -nobeeps -as 2 -spawnfd 4
M8ram 4964 0.0 0.7 5964 1940 ? S Dec15 0:00 gnome-smproxy --sm-config-prefix /.gnome-smproxy-XlqDEB/ --sm-client-id 117f00
M8ram 4978 0.0 0.6 3444 1592 ? S Dec15 0:00 xscreensaver -nosplash
M8ram 4980 0.0 1.2 5548 3272 ? S Dec15 0:00 sawfish --sm-client-id 117f000001000103106599300000036570010 --sm-prefix a8325
M8ram 4983 0.0 2.3 9136 5956 ? S Dec15 0:00 panel --sm-config-prefix /panel.d/default-uXBp7j/ --sm-client-id 117f000001000
M8ram 4985 1.0 2.2 17196 5728 ? D Dec15 0:20 nautilus --sm-config-prefix /nautilus-ynw3dl/ --sm-client-id 117f0000010001031
M8ram 4987 0.0 2.0 8856 5240 ? R Dec15 0:01 gnome-terminal --sm-config-prefix /gnome-terminal-1v1L7r/ --sm-client-id 117f0
M8ram 4989 0.0 1.4 9388 3676 ? S Dec15 0:00 gpilotd --sm-config-prefix /gpilotd-Qez4gd/ --sm-client-id 117f000001000103787
M8ram 4993 0.0 0.4 2872 1128 ? S Dec15 0:00 gnome-name-service
M8ram 4995 0.0 0.6 2948 1532 ? S Dec15 0:00 /usr/bin/gconfd-1 11
M8ram 4996 0.0 0.2 1348 524 ? S Dec15 0:00 gnome-pty-helper
M8ram 4997 0.0 0.5 2544 1448 pts/0 S Dec15 0:00 bash
M8ram 5047 0.0 1.6 7700 4280 ? S Dec15 0:00 tasklist_applet --activate-goad-server tasklist_applet --goad-fd 11
M8ram 5049 0.0 1.6 7640 4272 ? S Dec15 0:00 deskguide_applet --activate-goad-server deskguide_applet --goad-fd 11
M8ram 5051 0.0 1.5 7564 3972 ? SN Dec15 0:00 cpumemusage_applet --activate-goad-server cpumemusage_applet --goad-fd 11
M8ram 5053 0.0 1.5 7536 4060 ? S Dec15 0:00 rp3 --activate-goad-server rp3 --goad-fd 11
M8ram 5056 0.0 1.9 10168 5044 ? S Dec15 0:00 gpilot-applet --activate-goad-server gpilot-applet --goad-fd 11
M8ram 5058 0.0 1.5 7532 3872 ? S Dec15 0:00 gnomexmms --activate-goad-server gnomexmms --goad-fd 11
M8ram 5060 0.0 1.7 7800 4344 ? S Dec15 0:00 quicklaunch_applet --activate-goad-server quicklaunch_applet --goad-fd 11
root 5132 0.0 0.4 2088 1032 ? S Dec15 0:00 /bin/bash /sbin/adsl-connect /etc/sysconfig/network-scripts/ifcfg-ppp0
root 5142 0.0 0.3 1800 796 ? S Dec15 0:00 /usr/sbin/pppd pty /usr/sbin/pppoe -p /var/run/pppoe-adsl.pid.pppoe -I eth0 -T
root 5143 0.0 0.1 1316 460 ? S Dec15 0:00 /usr/sbin/pppoe -p /var/run/pppoe-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412
M8ram 5219 0.3 3.9 20696 9992 ? S Dec15 0:05 evolution
M8ram 5224 0.0 2.8 20496 7140 ? S Dec15 0:00 wombat --oaf-activate-iid=OAFIID:Bonobo_Moniker_wombat_Factory --oaf-ior-fd=11
M8ram 5233 0.0 1.6 8732 4212 ? S Dec15 0:00 bonobo-moniker-xmldb --oaf-activate-iid=OAFIID:Bonobo_Moniker_xmldb_Factory --
M8ram 5242 0.3 10.6 52652 27144 ? S Dec15 0:05 evolution-mail --oaf-activate-iid=OAFIID:GNOME_Evolution_Mail_ShellComponent -
M8ram 5254 0.0 3.1 20324 7928 ? S Dec15 0:00 evolution-addressbook --oaf-activate-iid=OAFIID:GNOME_Evolution_Addressbook_Sh
M8ram 5265 0.0 2.4 20056 6260 ? S Dec15 0:00 evolution-calendar --oaf-activate-iid=OAFIID:GNOME_Evolution_Calendar_ShellCom
M8ram 5276 0.0 2.1 17376 5528 ? S Dec15 0:00 evolution-alarm-notify --oaf-activate-iid=OAFIID:GNOME_Evolution_Calendar_Alar
M8ram 5279 0.0 2.1 17632 5356 ? S Dec15 0:00 evolution-executive-summary --oaf-activate-iid=OAFIID:GNOME_Evolution_Summary_
M8ram 5294 0.0 0.0 0 0 ? Z Dec15 0:00 [netstat <defunct>]
M8ram 5295 0.0 10.6 52652 27144 ? S Dec15 0:00 evolution-mail --oaf-activate-iid=OAFIID:GNOME_Evolution_Mail_ShellComponent -
M8ram 5296 0.0 10.6 52652 27144 ? S Dec15 0:00 evolution-mail --oaf-activate-iid=OAFIID:GNOME_Evolution_Mail_ShellComponent -
M8ram 5297 0.7 10.6 52652 27144 ? S Dec15 0:13 evolution-mail --oaf-activate-iid=OAFIID:GNOME_Evolution_Mail_ShellComponent -
M8ram 5300 0.0 10.6 52652 27144 ? S Dec15 0:00 evolution-mail --oaf-activate-iid=OAFIID:GNOME_Evolution_Mail_ShellComponent -
M8ram 5301 0.0 10.6 52652 27144 ? S Dec15 0:00 evolution-mail --oaf-activate-iid=OAFIID:GNOME_Evolution_Mail_ShellComponent -
M8ram 5305 0.0 10.6 52652 27144 ? S Dec15 0:00 evolution-mail --oaf-activate-iid=OAFIID:GNOME_Evolution_Mail_ShellComponent -
M8ram 5306 0.2 10.6 52652 27144 ? S Dec15 0:04 evolution-mail --oaf-activate-iid=OAFIID:GNOME_Evolution_Mail_ShellComponent -
M8ram 5411 0.0 10.6 52652 27144 ? S Dec15 0:00 evolution-mail --oaf-activate-iid=OAFIID:GNOME_Evolution_Mail_ShellComponent -
M8ram 5432 0.3 3.0 16832 7840 ? S Dec15 0:05 gnome-gtkhtml-editor-1.1 --oaf-activate-iid=OAFIID:GNOME_GtkHTML_Editor_Factor
M8ram 5436 0.0 3.9 27680 10104 ? S Dec15 0:00 gnome-spell-component-0.5 --oaf-activate-iid=OAFIID:GNOME_Spell_DictionaryFact
M8ram 5577 0.0 0.3 2684 780 pts/0 R 00:02 0:00 ps -aux
I finally logged out and rebooted my system, X no longer locks up butI
still can't access my writer, here's the output of dmesg after
rebooting:
[M8ram@localhost M8ram]$ dmesg
Linux version 2.4.18-3 ([EMAIL PROTECTED]) (gcc version
2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 Thu Apr 18 07:37:53 EDT
2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
BIOS-e820: 000000000fef0000 - 000000000fef3000 (ACPI NVS)
BIOS-e820: 000000000fef3000 - 000000000ff00000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
On node 0 totalpages: 65264
zone(0): 4096 pages.
zone(1): 61168 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=307
BOOT_FILE=/boot/vmlinuz-2.4.18-3 hdc=ide-scsi hdd=ide-scsi
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 801.431 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1599.07 BogoMIPS
Memory: 254428k/261056k available (1119k kernel code, 6240k reserved,
775k data, 280k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0387f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0387f9ff 00000000 00000000 00000000
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb100, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
PCI: Found IRQ 11 for device 00:1f.3
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 480 slots per queue, batch=120
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALLlct15 20, ATA DISK drive
hdc: no response (status = 0x80), resetting drive
hdc: no response (status = 0x80)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
blk: queue c035e6a4, I/O limit 4095Mb (mask 0xffffffff)
hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63,
UDMA(66)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 122k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 280k freed
Adding Swap: 409648k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 07:43:07 Apr 18 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1f.4
PCI: Sharing IRQ 11 with 01:04.0
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x3f0/0x3104) is not claimed by any
active driver.
usb.c: registered new driver usblp
usb.c: ignoring set_interface for dev 2, iface 0, alt 0
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2
vid 0x03F0 pid 0x3104
printer.c: v0.11: USB Printer Device Class driver
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: device reported incorrect length field (61, should be 62)
parport0 (addr 0): SCSI adapter, IMG VP1
ip_conntrack (2039 buckets, 16312 max)
8139too Fast Ethernet driver 0.9.24
PCI: Found IRQ 11 for device 01:04.0
PCI: Sharing IRQ 11 with 00:1f.4
eth0: RealTek RTL8139 Fast Ethernet at 0xd08d3000, 00:e0:7d:c8:a4:6b,
IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xd0000000
[drm] AGP 0.99 on Intel i810 @ 0xd0000000 64MB
[drm] Initialized i810 1.2.0 20010920 on minor 0
mtrr: base(0xd0000000) is not aligned on a size(0x180000) boundary
Creative EMU10K1 PCI Audio Driver, version 0.19a, 11:00:46 Jul 6 2002
PCI: Found IRQ 11 for device 01:09.0
emu10k1: EMU10K1 rev 7 model 0x8061 found, IO at 0xc400-0xc41f, IRQ 11
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
emu10k1: SBLive! 5.1 card detected
Any help would be greatly appreciated!
I apologise if I sent too much information and too little useful
information, I set xcdroast log-level to sparse but it really is too
sparse to be useful. All additional info I can give is the output of
both writing processes of xcdroast, but they seem identical to me (up to
the point where the first was unsuccessful and the second continued)
I'm running RH7.3 with Gnome 1.?, I keep most packages up-to-date with
Red Carpet but I installed the new xcdroast from rpms of the xdroast.org
website.
TIA
--
# Mertens Bram "M8ram" <[EMAIL PROTECTED]> Linux User #249103 #
# Red Hat Linux 7.3 KDE 3.0.0-10 kernel 2.4.18-3 i686 128MB RAM #
# 12:39am up 17 min, 1 user, load average: 0.08, 0.24, 0.33 #
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
-- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
