Brad Alpert said:
> This Compaq 1850R server is running RAID 5 in hardware, using a
> Compaq 221 controller. /dev/md14 appears to be the boot location.
I'm not famillar with this particular server but on a couple Compaq
DL380s that I have access to they do not use /dev/md* for boot, that
is typically used for software raid.
what does /etc/fstab say?
here is a lilo.conf from one of my DL380s, it runs debian, not redhat,
but the setup sounds similar to yours:
lba32
boot=/dev/ida/c0d0
root=/dev/ida/c0d0p6
install=/boot/boot.b
map=/boot/map
delay=20
vga=normal
default=Linux
image=/vmlinuz
label=Linux
read-only
image=/vmlinuz.old
label=LinuxOLD
read-only
optional
now redhat may have some special feature, that wants to use this /dev/md
device, but everything I know tells me that this device shouldn't be
used unless your using software raid.
nate
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
