Hi,
I have been struggling with my linux for ages now. Finally i seek
help again!!!.
I have a ALPHA AXP pci33 for which i am trying to use linux 5.0.
I am using WINDOWS NT 4.0 and it works well so far. I have my
modem (MOTOROLA Voice Surfer 56K Internal) configured to use
com3 and irq 5.
When i give the following command:
setserial /dev/modem or setserial /dev/cua2 i see that my UART is
unknown.
How can i get Linux to see the UART?
Next i set the UART to 16550A which is what the UART was for /dev/cua0 and
/dev/cua1.
Now if i try to dial using minicom i do not see any response.
Actually i could use the modem before and somehow linux recognised
the UART for /dev/cua2 also but i have reinstalled linux 5.0 and i am
facing the problem.
Please SUGGEST a workaround/solution . I will post my PPP related
question later.
Thanks a lot
Imran
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
