Hi Paul,
I get a similar situation. Although I can't help you.
I hope you don't mind me asking... do you find that
there is a significant delay in minicom to initialise
your modem.

Operation of the modem on my system seems to take ages?
any ideas or have you experienced this?




---Paul Lilley <[EMAIL PROTECTED]> wrote:
>
> Dear all,
> 
> I've just installed a new modem as I think my
previous PPP setup
> problems were at least partly caused by a faulty
modem.  New one is a
> USR Sportster 56k flash external plugged onto
/dev/cua1 (COM2) and seems
> to behave fine under minicom (responds to commands,
dials etc.).
> 
> However, when i try to use chat to talk to it using
the following 
> 
> /usr/sbin/chat -v                                  
           \
>                    TIMEOUT          3              
                \
>                    ABORT            '\nBUSY\r'     
                \
>                    ABORT            '\nNO ANSWER\r'
                \
>                    ABORT           
'\nRINGING\r\n\r\nRINGING\r'    \
>                    ''               ATZ            
                \
>                    'OK-+++\c-OK'    ATH0           
                \
>                    TIMEOUT          60             
                \
>                    OK               ATZ            
                \
>                    OK               'AT&F'         
                \
>                    OK               'AT&C1'        
                \
>                    OK               'AT&D2E1'      
                \
>                    OK               'ATS11=70'     
                \
>                    OK               'ATS7=30'      
                \
>                    OK               'ATDT055'      
                \
>                    CONNECT          ''
> 
> I get no response from the modem and the following
in /var/log/messages
> 
> 
> May 27 16:57:21 localhost chat[1008]: timeout set
to 3 seconds
> May 27 16:57:21 localhost chat[1008]: abort on
(\nBUSY\r)
> May 27 16:57:21 localhost chat[1008]: abort on
(\nNO ANSWER\r)
> May 27 16:57:21 localhost chat[1008]: abort on
> (\nRINGING\r\n\r\nRINGING\r)
> May 27 16:57:21 localhost chat[1008]: send (ATZ^M)
> May 27 16:57:21 localhost chat[1008]: expect (OK)
> May 27 16:57:24 localhost chat[1008]: alarm
> May 27 16:57:24 localhost chat[1008]: send (+++)
> May 27 16:57:24 localhost chat[1008]: expect (OK)
> May 27 16:57:27 localhost chat[1008]: alarm
> May 27 16:57:27 localhost chat[1008]: Failed
> 
> I have checked that /dev/modem is a link to
/dev/cua1 but beyond that I
> am confused.
> 
> Any enlightenment would be most welcome!
> 
> TIA
> Paul
> 
> 
> -- 
>   PLEASE read the Red Hat FAQ, Tips, Errata and the
MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata
/RedHat-Tips /mailing-lists
>          To unsubscribe: mail
[EMAIL PROTECTED] with 
>                        "unsubscribe" as the Subject.
> 
> 

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com


-- 
  PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
         To unsubscribe: mail [EMAIL PROTECTED] with 
                       "unsubscribe" as the Subject.

Reply via email to