Can't connect by SCRIPT just by HAND

[Tacio Alessandro Grespan dos Santos]

Hi,

I tried to connect by script without success. Everything goes right till
I get the following:

pppd[112]: Serial connection established.
pppd[112]: Using interface ppp0
pppd[112]: Connect: ppp0 <--> /dev/ttyS2

I checked then the debug file and I see that trying to negotiate the PPP
session.
It keeps sending the LCPs till it hangs up.

pppd[244]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xff4d0027>
 <pcomp> <accomp>] Jun 22 20:28:29 porto last message repeated 9 times

I tried different type of options, with and without compression again
without success. What confuses me using the same options and connecting
by hand it always work! I used minicom to dial, quit without reseting,
and
started pppd. (I'm using the pppd-2.3.5, linux kernel 2.0.34)

Does anybody know what's the problem?

Thanks for yout attention,

Tacio


-- 
  PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
         To unsubscribe: mail [EMAIL PROTECTED] with 
                       "unsubscribe" as the Subject.