Right, I talked to the guy that makes them, he said to try to keep it as
close to the rating as possible-the 1/2" model is 550 so anything under 550
use the 1/2" anything over step up to the 3/4", pretty simple. Using the Y
attachment will also cut back on pressure.
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, January 30, 2001 3:14 PM
Subject: Re: Sea Swirl
> Hi,
> Correct,It only comes in !/2 inch. I think its better. You get more water
> pressure out of the smaller 1/2inch. I had the 3/4, .less power with the
pump
> I'm using.
>
>
> Frank
> ________________________________________
>
> LEAVING THE LIST
> ================
> To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list.
The list manager controls who belongs to the list.
>
> For example:
> --------------------------------------------------------------
> From: John Doe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: <not needed>
>
> UNSUBSCRIBE
> --------------------------------------------------------------
>
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
