I'd open it up to make sure the water does not come in contact with the
stainless steel.
If not I'd go for it, remember to have a slow flow rate thru the unit.
> -----Original Message-----
> From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, March 20, 2001 4:27 PM
> To: [EMAIL PROTECTED]
> Subject: Re: stainless steel uv sterilizer
>
> Thanks for the replies so soon
> It is only a 30 gallon tank and the unit is 15 watts
> there is a sleeve that the water goes into
> It does not seem to me to come in contact with the steel but I can be
> wrong
> Jeff
> ________________________________________
>
> LEAVING THE LIST
> ================
> To stop receiving messages you will need to send a message to
> [EMAIL PROTECTED] with a command to remove you from the
> list. The list manager controls who belongs to the list.
>
> For example:
> --------------------------------------------------------------
> From: John Doe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: <not needed>
>
> UNSUBSCRIBE
> --------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
