Ok this was from the link you gave
"White Ozone Resistant ABS Venturi Valve,1/2" or 3/4" Female Pipe Thread
Inlet, 1/2" or 3/4" Male Pipe Thread Outlet,Can be Driven by a Large Power
Head. 3/4" Must be driven by a pump"
Note the word inlet. This would be where the pump attaches
Note the word outlet. This would be the skimmer.
Good Luck
:)
Nigel
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Casalegno Family
Email
Sent: Saturday, March 24, 2001 12:15 PM
To: [EMAIL PROTECTED]
Subject: Help Kent Turbo Venturi question
Can anyone tell me which way the Kent Turbo Venturi works best i have the
3/4 male/femal one?and there is no directions!!!
The male end is farthest fron the air intake
and the female side is closet to the intake.
which side do i hook to the pump and which side do i hook to the
skimmer???????
here is a link if you need to see what im talking about
http://www.kentmarine.com/vv.htm
Bryan Casalegno
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list.
The list manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
