I would, and as someone else suggested, using a 1/8th inch connector with threads at the end. That would work best, but I couldnt find any at the local ace hw store. I am going to try a couple of other places, but if I cant find it, I will probably just do the hole/glue/jam the tube into it like DBW suggested. Thanks again, Shane > -----Original Message----- > From: Jerry Porter [SMTP:[EMAIL PROTECTED]] > Sent: Wednesday, September 19, 2001 4:44 PM > To: [EMAIL PROTECTED] > Subject: RE: Glue > > I use a tap and drill. When treaded you don't need glue > jp > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of Shane Clays > Sent: Tuesday, September 18, 2001 12:14 PM > To: '[EMAIL PROTECTED]' > Subject: Glue > > All, > What would be the best glue for me to use to glue a clear plastic > airline > tube connector (the kind that goes into airstones) into a piece of PVC? > I am > trying to get the CO2 injection into my reactor fixed, and need to hook > an > airline tubing connector to some PVC. If anyone knows a better way than > to > use that connector, please inform. > > Thanks all, > Shane C. > ________________________________________ > > LEAVING THE LIST > ================ > To stop receiving messages you will need to send a message to > [EMAIL PROTECTED] with a command to remove you from the > list. The list manager controls who belongs to the list. > > For example: > -------------------------------------------------------------- > From: John Doe <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Subject: <not needed> > > UNSUBSCRIBE > -------------------------------------------------------------- > > ________________________________________ > > LEAVING THE LIST > ================ > To stop receiving messages you will need to send a message to > [EMAIL PROTECTED] with a command to remove you from the > list. The list manager controls who belongs to the list. > > For example: > -------------------------------------------------------------- > From: John Doe <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Subject: <not needed> > > UNSUBSCRIBE > -------------------------------------------------------------- ________________________________________ LEAVING THE LIST ================ To stop receiving messages you will need to send a message to [EMAIL PROTECTED] with a command to remove you from the list. The list manager controls who belongs to the list. For example: -------------------------------------------------------------- From: John Doe <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: <not needed> UNSUBSCRIBE --------------------------------------------------------------
