Hi. I hope all these details are OK.
I only have a problem with /dev/hdb1 - I get the following message with
terminates the --rebuild-tree or --fix-fixable directives:
Replaying journal..
0 transactions replayed
Checking internal tree..
Bad root block 0. (--rebuild-tree did not complete)
Aborted
If I run --rebuild-sb I get:
Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
rebuild-sb: wrong tree height occured (65535), zeroed
rebuild-sb: You either have a corrupted journal or have just changed
the start of the partition with some partition table editor. If you are
sure that the start of the partition is ok, rebuild the journal header.
Do you want to rebuild the journal header? (y/n)[n]: y
Reiserfs super block in block 16 on 0x341 of format 3.5 with standard journal
Count of blocks on the device: 2560351
Number of bitmaps: 79
Blocksize: 4096
Free blocks (count of blocks - used [journal, bitmaps, data, reserved]
blocks): 2560351
Root block: 0
Filesystem is clean
Tree height: 0
Hash function used to sort names: "r5"
Objectid map size 4, max 1004
Journal parameters:
Device [0x0]
Magic [0x0]
Size 8193 blocks (including 1 for journal header) (first block 18)
Max transaction length 1024 blocks
Max batch size 900 blocks
Max commit age 30
Blocks reserved by journal: 0
Fs state field: 0xfa03:
FATAL corruptions exist.
some corruptions exist.
sb_version: 0
Is this ok ? (y/n)[n]: y
The fs may still be unconsistent. Run reiserfsck --check.
Cheers, Grahame
---- Details ----
Linux glider 2.4.21-166-athlon #1 Wed Jan 7 03:05:30 UTC 2004 i686 athlon i386
GNU/Linux (SuSE 9.0 Pro Distribution).
top - 13:38:30 up 1 day, 2:55, 11 users, load average: 0.19, 0.59, 0.61
Tasks: 137 total, 3 running, 132 sleeping, 0 stopped, 2 zombie
Cpu(s): 6.2% user, 2.8% system, 0.0% nice, 91.1% idle
Mem: 1032852k total, 312016k used, 720836k free, 47240k buffers
Swap: 1036152k total, 60648k used, 975504k free, 67296k cached
Disk /dev/hdb: 41.1 GB, 41174138880 bytes
255 heads, 63 sectors/track, 5005 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 1275 10241406 83 Linux
/dev/hdb2 1276 2550 10241437+ 83 Linux
/dev/hdb3 2551 3825 10241437+ 83 Linux
/dev/hdb4 3826 5005 9478350 83 Linux
glider:/ # rpm -qa|grep reiser
reiserfs-3.6.9-33
glider:/proc/ide # cat drivers
ide-cdrom version 4.59-ac1
ide-floppy version 0.99.newide
ide-disk version 1.17
ide-default version 0.9.newide
glider:/proc/ide # cat amd74xx
----------AMD BusMastering IDE Configuration----------------
Driver Version: 2.11
South Bridge: PCI device 10de:0065 (nVidia Corporation)
Revision: IDE 0xa2
Highest DMA rate: UDMA100
BM-DMA base: 0xf000
PCI clock: 33.3MHz
-----------------------Primary IDE-------Secondary IDE------
Prefetch Buffer: yes yes
Post Write Buffer: yes yes
Enabled: yes yes
Simplex only: no no
Cable Type: 80w 80w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA UDMA PIO PIO
Address Setup: 30ns 30ns 30ns 30ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 90ns 90ns 90ns
Data Recovery: 30ns 30ns 30ns 30ns
Cycle Time: 20ns 20ns 120ns 120ns
Transfer Rate: 99.9MB/s 99.9MB/s 16.6MB/s 16.6MB/s
glider:/proc/ide # lsmod | grep ide
ide-cd 32416 0 (autoclean)
videodev 6272 8 (autoclean) [bttv]
cdrom 29216 0 (autoclean) [ide-cd sr_mod]
Will rebuild the filesystem (/dev/hdb1) tree
Will put log info to '/tmp/rebuild2.log'
Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
Replaying journal..
0 transactions replayed
###########
reiserfsck --rebuild-tree started at Sat Feb 21 13:29:53 2004
###########
Pass 0:
Loading on-disk bitmap .. ok, 2560351 blocks marked used
Skipping 8289 blocks (super block, journal, bitmaps) 2552062 blocks will be read
0%....20%....40%....60%....80%....100% left 0, 9558 /sec
"r5" hash is selected
Flushing..finished
Read blocks (but not data blocks) 2552062
Leaves among those 8562
Objectids found 25649
Pass 1 (will try to insert 8562 leaves):
Looking for allocable blocks .. finished
0%....20%....40%....60%....80%....Not enough allocable blocks, checking bitmap...there are 1 allocable blocks, btw
out of disk space
Aborted
####### Pass 0 #######
25647 directory entries were hashed with "r5" hash.
####### Pass 1 #######
smartctl version 5.1-18 Copyright (C) 2002-3 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED
RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0
2 Throughput_Performance 0x0005 138 138 050 Pre-fail Offline -
314
3 Spin_Up_Time 0x0007 115 115 024 Pre-fail Always -
187 (Average 194)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always -
468
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 136 136 020 Pre-fail Offline -
31
9 Power_On_Hours 0x0012 099 099 000 Old_age Always -
12128
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always -
466
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always -
468
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always -
468
194 Temperature_Celsius 0x0002 127 127 000 Old_age Always -
43 (Lifetime Min/Max 11/51)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always -
1
