Hi Sam. Some difference can be expected, but this sounds quite crazy.
Can you check the log file from the output from GUI and script? You can "grep" after commands with: egrep -wi --color 'relax>| model -' $LOG (http://wiki.nmr-relax.com/Grep_log_file) After relax starts the dAuvergne_protocol, closely inspect that the "same" models are chosen in the calculation. In the modelfree setup, there are quite some options to check out. You can see all these options in the GUI with the buttons. But I am happy to hear that the script works for you. Most "relaxers" starts with the GUI and then quickly turn into script mode. The GUI is so nice to have, to see all the buttons and get comfortable in the start. But when massive amounts of data is coming your way, scripting is the way forward. Best Troels 2016-09-28 18:07 GMT+02:00 Mahdi, Sam <sam.mahdi....@my.csun.edu>: > Hi Troels, > > No, the only execution I had in my script was the final one. > > # Do not change! > dAuvergne_protocol(pipe_name=name, pipe_bundle=pipe_bundle, > diff_model=DIFF_MODEL, mf_models=MF_MODELS, local_tm_models=LOCAL_TM_MODELS, > grid_inc=GRID_INC, min_algor=MIN_ALGOR, mc_sim_num=MC_NUM, > conv_loop=CONV_LOOP) > > > On Wed, Sep 28, 2016 at 3:16 AM, Troels Emtekær Linnet < > tlin...@nmr-relax.com> wrote: > >> Hi Sam. >> >> Thank you for your valuable feedback! >> It makes it more fun to help :) >> >> Can you check if this is not in your script : >> http://wiki.nmr-relax.com/Tutorial_for_model-free_analysis_ >> sam_mahdi#Let_us_try_to_execute >> >> # Execution.############ >> # Change some opt params.# COMMENT THESE OUT FOR REAL CALCULATION. THIS IS >> ONLY TO SPEED UP THE PROCESS IN ERROR SEARCHING. >> dAuvergne_protocol.opt_func_tol = 1e-5 >> dAuvergne_protocol.opt_max_iterations = 1000 >> >> >> >> Best Troels >> >> >> Den onsdag den 28. september 2016 skrev Mahdi, Sam < >> sam.mahdi....@my.csun.edu>: >> >>> Hi Troels, >>> >>> I wanted to give a bit of feedback on the results I've obtained >>> throughout the few weeks I've been using model free on relax. First off, >>> thank you guys (both you and Edward) immensly for your patience and help as >>> I attempted to understand and work relax. Secondly, I have noticed a >>> difference between using the gui and the terminal (using scripts to run >>> relax). I've currently finished about 3 runs using the gui, and 3 runs >>> using the terminal (all the same data sets, same pdb files, same settings, >>> etc.). The gui takes about a week to finish, where the terminal takes >>> approximately 24 hours. I've tried this on 2 proteins, both had the same >>> results. The terminal is by far, much faster than the gui. Finally, I've >>> run 1 protein on 2 different computers (one using the multi-processor >>> platform, and on another computer, single-processor). The data sets were >>> all the same, the same pdb file, etc. , but the results I obtained from the >>> computers were slightly different. For the most part, most of the >>> difference in the data was similar, slightly different, but within the >>> error. But there were about 7 or 8 data points that appeared in one run on >>> one computer, and were absent in another run on another computer. This >>> happened in both the S^2 I analyzed and the Rex. >>> I.e. On the fedora 20 (single processor), say I had S^2 values for amino >>> acid 24,25 and 26 in the sequence, but not for 28,29, and 30. On the fedora >>> 24 (multi-processor), I might be missing a value for amino acid 24, but I >>> would have S^2 values for 28,29 and 30. Note the data sets are all the >>> same, the pdb files the same, settings the same, I used the same script for >>> both. The only difference between these runs is they were run on different >>> computer and one was single processor well another was multi. >>> I don't know why I obtained different data from 2 different runs, when >>> the input was all the same, just on different computers. >>> However the S^2 values do make sense. The Rex values were incredibly >>> small (1x10^-20), but there are some similarities (in terms of big Rex >>> values) between the Rex I obtained from relax, and CPMG data analyzed by >>> glove. So I have been able to obtain some reasonable data and results from >>> model_free using relax. >>> >>> Sincerely, >>> Sam >>> >>> >>> >>> On Mon, Sep 26, 2016 at 2:59 PM, Mahdi, Sam <sam.mahdi....@my.csun.edu> >>> wrote: >>> >>>> Hi Troels, >>>> >>>> >>>> I have attempted the fix for running on a multi-processor platform by >>>> creating the script you told me too, and I still got the same result. I >>>> have uploaded a screenshot that shows again, relax is running in the >>>> background, but there is no output for relax, nor can I input any commands. >>>> The only output I recieve is this: >>>> Running relax with NP=$NPROC+8|bc in multi-processor mode >>>> >>>> And any command I type in after that gets no response. >>>> >>>> I've also checked the spins via script. For 2 scenarios. Scenario 1- >>>> All hydrogens are kept as HN and Scenario 2- I change all the HN spins to >>>> H. >>>> The output from Scenario one is, it read all the Nitrogen spins >>>> accordingly : >>>> Objects: >>>> element: 'N' >>>> isotope: '15N' >>>> name: 'N' >>>> num: 1304 >>>> pos: array([ 13.196999999999999, 15.218 , >>>> 3.192 ]) >>>> select: True >>>> hRGS4 178 THR #hRGS4:178@1304 >>>> Class containing all the spin system specific data. >>>> >>>> >>>> Objects: >>>> element: 'N' >>>> isotope: '15N' >>>> name: 'N' >>>> num: 2617 >>>> pos: array([ 22.696000000000002, 10.683999999999999, >>>> -4.15 ]) >>>> select: True >>>> hRGS4 178 THR #hRGS4:178@2617 >>>> >>>> But no hydrogens. >>>> >>>> Scenario 2- I still recieve the same error. >>>> RelaxError: Multiple alternate location indicators are present in the >>>> PDB file, but the desired coordinate set has not been specified. >>>> >>>> Sincerely, >>>> Sam >>>> >>>> On Mon, Sep 26, 2016 at 2:19 PM, Mahdi, Sam <sam.mahdi....@my.csun.edu> >>>> wrote: >>>> >>>>> Hi Troels, >>>>> >>>>> I have attempted the fix for running on a multi-processor platform by >>>>> creating the script you told me too, and I still got the same result. I >>>>> have uploaded a screenshot that shows again, relax is running in the >>>>> background, but there is no output for relax, nor can I input any >>>>> commands. >>>>> The only output I recieve is this: >>>>> Running relax with NP=$NPROC+8|bc in multi-processor mode >>>>> >>>>> And any command I type in after that gets no response. >>>>> >>>>> Sincerely, >>>>> Sam >>>>> >>>>> >>>>> On Sun, Sep 25, 2016 at 6:43 AM, Troels Emtekær Linnet < >>>>> tlin...@nmr-relax.com> wrote: >>>>> >>>>>> Hi Sam. >>>>>> >>>>>> Try to load the pdb file and make a spin_loop over the information. >>>>>> How does the information look like? >>>>>> http://wiki.nmr-relax.com/Tutorial_for_model-free_analysis_s >>>>>> am_mahdi#Check_the_spin_containers_via_script >>>>>> >>>>>> Regarding the multiprocessor on your Fedora 20 machine, try to have a >>>>>> look at the bug. >>>>>> https://gna.org/bugs/?25084 >>>>>> >>>>>> ----- >>>>>> I suspect there is a mismatch between two installations of relax. >>>>>> One version of 2.x and one local of 4.x. >>>>>> Try adding the full path to relax >>>>>> ----- >>>>>> >>>>>> Try make a run script like this and copy it some where to your PATH >>>>>> myrelax >>>>>> ------ >>>>>> >>>>>> #!/bin/tcsh -fe >>>>>> >>>>>> # Set the relax version used for this script. >>>>>> set RELAX=/sbinlab2/tlinnet/software/NMR-relax/relax_trunk/relax >>>>>> >>>>>> # Set number of available CPUs. >>>>>> set NPROC=`nproc` >>>>>> set NP=`echo $NPROC + 0 | bc ` >>>>>> echo "Running relax with NP=$NP in multi-processor mode" >>>>>> >>>>>> # Run relax in multi processor mode. >>>>>> mpirun -np $NP $RELAX --multi='mpi4py' $argv >>>>>> >>>>>> 2016-09-24 1:03 GMT+02:00 Mahdi, Sam <sam.mahdi....@my.csun.edu>: >>>>>> >>>>>>> Hi Troels, >>>>>>> >>>>>>> Update on Protein number 1: So I was able to successfully run model >>>>>>> free with no problems on my protein (I don't know why it was giving >>>>>>> problems before). The reason it may have been giving issues though is >>>>>>> the >>>>>>> protein I am working with forms a dimer at the concentrations we work >>>>>>> with >>>>>>> (thus the results I have are for the Dimer form of the protein). The pdb >>>>>>> file though only has a monomer structure though. I have been able to >>>>>>> obtain >>>>>>> the dimer pdb file using HADDOCK (docking program), but have come >>>>>>> across a >>>>>>> few problems uploading the pdb file. >>>>>>> The initial problem was that all the hydrogens attached to the >>>>>>> nitrogen were HN labeled on the HADDOCK modified pdb file, and model >>>>>>> free >>>>>>> could not understand what HN meant, and I would recieve this warning. >>>>>>> RelaxWarning: Cannot determine the element associated with atom 'HN'. >>>>>>> >>>>>>> I could however load up all the Nitrogen, but naturally, with no >>>>>>> hydrogens, it wouldn't be able to calculate any bond vectors between >>>>>>> nitrogen and hydrogen. So I would recieve this error and the program >>>>>>> would >>>>>>> close >>>>>>> RelaxError: The spin ID '@H' matches no spins. >>>>>>> >>>>>>> To fix this, I changed all the HN spins, to just H, but then >>>>>>> recieved another error. >>>>>>> RelaxError: Multiple alternate location indicators are present in >>>>>>> the PDB file, but the desired coordinates set has not been specified. >>>>>>> >>>>>>> I don't exactly understand what this error means. Is it saying the >>>>>>> program can't locate the 3D coordinates for the Hydrogen and Nitrogen? >>>>>>> If >>>>>>> that is the case, why was it able to before, when it couldn't read any >>>>>>> of >>>>>>> the Hydrogen spins. I'm just confused a bit as to what this error means. >>>>>>> >>>>>>> Sincerely, >>>>>>> Sam >>>>>>> >>>>>>> On Wed, Sep 21, 2016 at 3:18 PM, Mahdi, Sam < >>>>>>> sam.mahdi....@my.csun.edu> wrote: >>>>>>> >>>>>>>> Hi Troels, >>>>>>>> >>>>>>>> Update on protein number 1. I ran it with only 5 simulations. It >>>>>>>> took a while, but it ended up finishing. So I assume its due to bad >>>>>>>> data >>>>>>>> simply slowing down the process. >>>>>>>> Update on protein number 2. I ran it with only 2 spins as well, and >>>>>>>> I still recieved the same error. I suspect its due to the pdb file. I'm >>>>>>>> going to attempt to use another program to add the hydrogens to my pdb >>>>>>>> file >>>>>>>> and try again. >>>>>>>> >>>>>>>> Sincerely, >>>>>>>> Sam >>>>>>>> >>>>>>>> On Tue, Sep 20, 2016 at 1:31 PM, Mahdi, Sam < >>>>>>>> sam.mahdi....@my.csun.edu> wrote: >>>>>>>> >>>>>>>>> Thats weird, I can open it up directly from the link you sent me. >>>>>>>>> I'll reupload it >>>>>>>>> >>>>>>>>> On Tue, Sep 20, 2016 at 12:40 PM, Troels Emtekær Linnet < >>>>>>>>> tlin...@nmr-relax.com> wrote: >>>>>>>>> >>>>>>>>>> The file: >>>>>>>>>> file #28673: relax -i data for 4.0,2 a >>>>>>>>>> >>>>>>>>>> https://gna.org/bugs/download.php?file_id=28673 >>>>>>>>>> >>>>>>>>>> Its emtpy? >>>>>>>>>> >>>>>>>>>> 2016-09-20 20:05 GMT+02:00 Mahdi, Sam <sam.mahdi....@my.csun.edu> >>>>>>>>>> : >>>>>>>>>> >>>>>>>>>>> Hi Troels, >>>>>>>>>>> >>>>>>>>>>> I am a bit confused what you are talking about. There is no file >>>>>>>>>>> labeled .? >>>>>>>>>>> >>>>>>>>>>> On Tue, Sep 20, 2016 at 9:15 AM, Troels Emtekær Linnet < >>>>>>>>>>> tlin...@nmr-relax.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi Sam. >>>>>>>>>>>> >>>>>>>>>>>> On >>>>>>>>>>>> https://gna.org/bugs/?25084 >>>>>>>>>>>> >>>>>>>>>>>> I cannot open the file.? >>>>>>>>>>>> >>>>>>>>>>>> In the meantime, try to specify the full path to relax. Not >>>>>>>>>>>> just ./relax >>>>>>>>>>>> but /home/user/xxx/relax >>>>>>>>>>>> >>>>>>>>>>>> Best >>>>>>>>>>>> Troels >>>>>>>>>>>> >>>>>>>>>>>> 2016-09-19 23:13 GMT+02:00 Mahdi, Sam < >>>>>>>>>>>> sam.mahdi....@my.csun.edu>: >>>>>>>>>>>> >>>>>>>>>>>>> I just uploaded the 4.0.2 relax -i info. I already have minfx >>>>>>>>>>>>> 1.0.12 with 4.0.2. But I can't open relax on multi processor >>>>>>>>>>>>> platform for >>>>>>>>>>>>> either version. >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, Sep 19, 2016 at 10:47 AM, Troels Emtekær Linnet < >>>>>>>>>>>>> tlin...@nmr-relax.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Please upgrade! >>>>>>>>>>>>>> >>>>>>>>>>>>>> Name Installed Version Current >>>>>>>>>>>>>> version >>>>>>>>>>>>>> minfx True 1.0.4 >>>>>>>>>>>>>> 1.0.12 >>>>>>>>>>>>>> >>>>>>>>>>>>>> relax information: >>>>>>>>>>>>>> Version: 2.2.5 4.0.2 >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2016-09-19 19:41 GMT+02:00 Mahdi, Sam < >>>>>>>>>>>>>> sam.mahdi....@my.csun.edu>: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Troels, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I have uploaded the bug report for the issue with running >>>>>>>>>>>>>>> relax on multiple processors on my fedora 20 computer. I will >>>>>>>>>>>>>>> upload the >>>>>>>>>>>>>>> mpirun report bindings on the fedora 24 computer later today >>>>>>>>>>>>>>> (that is not >>>>>>>>>>>>>>> my lab so I don't have access to it, and the professor is not >>>>>>>>>>>>>>> in yet). If >>>>>>>>>>>>>>> there is any more info that is needed please let me know. >>>>>>>>>>>>>>> Thanks again in >>>>>>>>>>>>>>> advance. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sincerely, >>>>>>>>>>>>>>> Sam >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Mon, Sep 19, 2016 at 10:24 AM, Mahdi, Sam < >>>>>>>>>>>>>>> sam.mahdi....@my.csun.edu> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi Troels, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thanks for the quick response! >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Protein 1: I will attempt to troubleshoot using the advice >>>>>>>>>>>>>>>> you gave me. The problem occurs write after it indicates its >>>>>>>>>>>>>>>> writing a file >>>>>>>>>>>>>>>> for prolate round_3 (so its about to start it). I will run it >>>>>>>>>>>>>>>> again and >>>>>>>>>>>>>>>> post the output to give you a better idea. I'm pretty sure the >>>>>>>>>>>>>>>> output was >>>>>>>>>>>>>>>> something like this >>>>>>>>>>>>>>>> Over-fit spin deselection: >>>>>>>>>>>>>>>> No spins have been deselected. >>>>>>>>>>>>>>>> Resetting the minimisation statistics. >>>>>>>>>>>>>>>> But I will double check and send you another email with the >>>>>>>>>>>>>>>> actual output. >>>>>>>>>>>>>>>> Protein 2: >>>>>>>>>>>>>>>> I am using the sample script for dAuvergene protocol. So >>>>>>>>>>>>>>>> the only thing I've changed since my previous run (the one >>>>>>>>>>>>>>>> that worked that >>>>>>>>>>>>>>>> you wrote a tutorial for), was the pdb file and the data set I >>>>>>>>>>>>>>>> used. The >>>>>>>>>>>>>>>> thing I suspected was causing an issue ,was the pdb file since >>>>>>>>>>>>>>>> I slightly >>>>>>>>>>>>>>>> modified it, and thats really the only thing different from >>>>>>>>>>>>>>>> this run versus >>>>>>>>>>>>>>>> the others. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Also side note, if I were to deselect the spins that I >>>>>>>>>>>>>>>> don't have data for or I have bad data for, that wouldn't >>>>>>>>>>>>>>>> change any of the >>>>>>>>>>>>>>>> calculations correct? I never have since I assumed relax would >>>>>>>>>>>>>>>> just ignore >>>>>>>>>>>>>>>> all the amino acids I don't have data for, but it may help >>>>>>>>>>>>>>>> increase the >>>>>>>>>>>>>>>> speed of my calculations if I just tell relax to just ignore >>>>>>>>>>>>>>>> the spins from >>>>>>>>>>>>>>>> the start. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Sincerely, >>>>>>>>>>>>>>>> Sam >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Mon, Sep 19, 2016 at 9:12 AM, Troels Emtekær Linnet < >>>>>>>>>>>>>>>> tlin...@nmr-relax.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi Sam. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Happy to hear you that you get some progress. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Protein 1: >>>>>>>>>>>>>>>>> Can you help me to find out, if you are minimizing or >>>>>>>>>>>>>>>>> running Monte-Carlo simulations? >>>>>>>>>>>>>>>>> This COULD be the problem: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> How relax works (at least how it works for relaxation >>>>>>>>>>>>>>>>> dispersion): >>>>>>>>>>>>>>>>> Step 1: Minimize the error for the target function. Find >>>>>>>>>>>>>>>>> the parameters which best match the target function to the >>>>>>>>>>>>>>>>> data, by >>>>>>>>>>>>>>>>> minimizing the error. >>>>>>>>>>>>>>>>> Here each individual spin minimization is handed out to a >>>>>>>>>>>>>>>>> processor for calculation. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Step 2: Determine the error of the minimization by monte >>>>>>>>>>>>>>>>> carlo simulations. >>>>>>>>>>>>>>>>> Create (Standard 500) additional datasets with a copy from >>>>>>>>>>>>>>>>> the original. Modify each datapoint by an error, drawn from a >>>>>>>>>>>>>>>>> gaussian >>>>>>>>>>>>>>>>> distribution where the width is described by the error of >>>>>>>>>>>>>>>>> measurements. >>>>>>>>>>>>>>>>> Now hand out each of the datasets to the processor. Each >>>>>>>>>>>>>>>>> processor should now calculate the minimization for all the >>>>>>>>>>>>>>>>> spins. The >>>>>>>>>>>>>>>>> minimization should be more quick, as the starting position >>>>>>>>>>>>>>>>> is chosen from >>>>>>>>>>>>>>>>> Step 1. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Possible problem: One (or more) of the spins has really >>>>>>>>>>>>>>>>> bad data. So a little change of the data makes the >>>>>>>>>>>>>>>>> minimization space very >>>>>>>>>>>>>>>>> different. >>>>>>>>>>>>>>>>> Think of a flat table. Where should the "minimization >>>>>>>>>>>>>>>>> ball" run into? Maybe you have created a small new bump in >>>>>>>>>>>>>>>>> the table. This >>>>>>>>>>>>>>>>> is typically for "bad" data. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> This could either be the measurement OR the error >>>>>>>>>>>>>>>>> estimation. Relax will keep on searching for minimization. >>>>>>>>>>>>>>>>> If you are "unlucky", some of the created datasets will >>>>>>>>>>>>>>>>> make relax hang for a very long time. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Unfortunately, it is NOT possible to ask a processor about >>>>>>>>>>>>>>>>> its "current" work, when it is doing a minimization for a >>>>>>>>>>>>>>>>> whole dataset. >>>>>>>>>>>>>>>>> And if it was, it would create an output of 64 spins being >>>>>>>>>>>>>>>>> minimized at the same time, creating a big mess, since the >>>>>>>>>>>>>>>>> processors are >>>>>>>>>>>>>>>>> working alone. When doing Monte-Carlo simulations, relax are >>>>>>>>>>>>>>>>> quite silent. >>>>>>>>>>>>>>>>> Only reporting when a whole dataset is done. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Is relax stuck in Monte-Carlo simulations? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Possible solution: >>>>>>>>>>>>>>>>> *) Set Monte-Carlo simulations to 3 (which is minimum), >>>>>>>>>>>>>>>>> and know that you have found the right minimum, but the error >>>>>>>>>>>>>>>>> estimation of >>>>>>>>>>>>>>>>> the parameters are wrong. >>>>>>>>>>>>>>>>> *) Carefully inspect your data, deselecting all spins >>>>>>>>>>>>>>>>> which have "bad data". Look at their graphs. Consider working >>>>>>>>>>>>>>>>> with as few >>>>>>>>>>>>>>>>> spins as possible, and work your way up! Working this way >>>>>>>>>>>>>>>>> will greatly >>>>>>>>>>>>>>>>> increase your productivity. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Protein 2: >>>>>>>>>>>>>>>>> Are you setting the bonds for the minimization manually? >>>>>>>>>>>>>>>>> This looks like the upper/lower bonds are specified wrong. >>>>>>>>>>>>>>>>> This is not easy to do. How are you doing it? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Best >>>>>>>>>>>>>>>>> Troels >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2016-09-19 17:11 GMT+02:00 Mahdi, Sam < >>>>>>>>>>>>>>>>> sam.mahdi....@my.csun.edu>: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi Troels, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I have successfully been able to run the model-free >>>>>>>>>>>>>>>>>> analysis on 64 cores. The issue appears to have been I >>>>>>>>>>>>>>>>>> simply did not >>>>>>>>>>>>>>>>>> specify the spin number, so after looking at your tutorial >>>>>>>>>>>>>>>>>> and making the >>>>>>>>>>>>>>>>>> proper modifications, it ran with no complications. The >>>>>>>>>>>>>>>>>> results are >>>>>>>>>>>>>>>>>> somewhat reasonable. I decided to try to run 2 other >>>>>>>>>>>>>>>>>> proteins however; and >>>>>>>>>>>>>>>>>> I've come across problems for both again. >>>>>>>>>>>>>>>>>> Protein 1: >>>>>>>>>>>>>>>>>> I set this up just like the tutorial, and it runs with no >>>>>>>>>>>>>>>>>> warnings or errors; however, the run never finishes. At >>>>>>>>>>>>>>>>>> round_3 for the >>>>>>>>>>>>>>>>>> prolate model when it starts to minimize it just stops. I >>>>>>>>>>>>>>>>>> don't mean relax >>>>>>>>>>>>>>>>>> is stopped or closed, I mean it stops doing any >>>>>>>>>>>>>>>>>> calculations. Relax is >>>>>>>>>>>>>>>>>> still open, and if I run the top command, I can still see >>>>>>>>>>>>>>>>>> something is >>>>>>>>>>>>>>>>>> going on with the other cores, but nothing is being >>>>>>>>>>>>>>>>>> calculated. The run >>>>>>>>>>>>>>>>>> with 64 cores is incredibly fast (under 4 hours), so I don't >>>>>>>>>>>>>>>>>> think it's >>>>>>>>>>>>>>>>>> loading calculations or writing them, and I've left it there >>>>>>>>>>>>>>>>>> for over 24 >>>>>>>>>>>>>>>>>> hours, and it's still just sorta stuck. There are no errors, >>>>>>>>>>>>>>>>>> no outputs, it >>>>>>>>>>>>>>>>>> just says its gonna start to minimize and then nothing >>>>>>>>>>>>>>>>>> happens after that. >>>>>>>>>>>>>>>>>> Protein2: >>>>>>>>>>>>>>>>>> This protein was a little different since the pdb >>>>>>>>>>>>>>>>>> structure was a crystal structure. I had to use WhatIf to >>>>>>>>>>>>>>>>>> add the protons >>>>>>>>>>>>>>>>>> onto the pdb file. The structure appears to load up fine, >>>>>>>>>>>>>>>>>> all the spins >>>>>>>>>>>>>>>>>> appear to be read, data is loaded, vectors and are >>>>>>>>>>>>>>>>>> calculated and define, >>>>>>>>>>>>>>>>>> but when I came to run the protocol this error pops up: >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/multi/processor.py", line >>>>>>>>>>>>>>>>>> 494, in run >>>>>>>>>>>>>>>>>> self.callback.init_master(self) >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/multi/__init__.py", line >>>>>>>>>>>>>>>>>> 318, in default_init_master >>>>>>>>>>>>>>>>>> self.master.run() >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/relax.py", line 199, in >>>>>>>>>>>>>>>>>> run >>>>>>>>>>>>>>>>>> self.interpreter.run(self.script_file) >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/prompt/interpreter.py", >>>>>>>>>>>>>>>>>> line 279, in run >>>>>>>>>>>>>>>>>> return run_script(intro=self.__intro_string, >>>>>>>>>>>>>>>>>> local=locals(), script_file=script_file, >>>>>>>>>>>>>>>>>> show_script=self.__show_script, >>>>>>>>>>>>>>>>>> raise_relax_error=self.__raise_relax_error) >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/prompt/interpreter.py", >>>>>>>>>>>>>>>>>> line 585, in run_script >>>>>>>>>>>>>>>>>> return console.interact(intro, local, script_file, >>>>>>>>>>>>>>>>>> show_script=show_script, raise_relax_error=raise_relax_ >>>>>>>>>>>>>>>>>> error) >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/prompt/interpreter.py", >>>>>>>>>>>>>>>>>> line 484, in interact_script >>>>>>>>>>>>>>>>>> exec_script(script_file, local) >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/prompt/interpreter.py", >>>>>>>>>>>>>>>>>> line 363, in exec_script >>>>>>>>>>>>>>>>>> runpy.run_module(module, globals) >>>>>>>>>>>>>>>>>> File "/usr/lib64/python2.7/runpy.py", line 192, in >>>>>>>>>>>>>>>>>> run_module >>>>>>>>>>>>>>>>>> fname, loader, pkg_name) >>>>>>>>>>>>>>>>>> File "/usr/lib64/python2.7/runpy.py", line 72, in >>>>>>>>>>>>>>>>>> _run_code >>>>>>>>>>>>>>>>>> exec code in run_globals >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/HdeA_script.py", line 30, >>>>>>>>>>>>>>>>>> in <module> >>>>>>>>>>>>>>>>>> dAuvergne_protocol(pipe_name=n >>>>>>>>>>>>>>>>>> ame,pipe_bundle=pipe_bundle,di >>>>>>>>>>>>>>>>>> ff_model=DIFF_MODEL,mf_models= >>>>>>>>>>>>>>>>>> MF_MODELS,local_tm_models=LOCA >>>>>>>>>>>>>>>>>> L_TM_MODELS,grid_inc=GRID_INC, >>>>>>>>>>>>>>>>>> min_algor=MIN_ALGOR,mc_sim_num >>>>>>>>>>>>>>>>>> =MC_NUM,conv_loop=CONV_LOOP) >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/auto_a >>>>>>>>>>>>>>>>>> nalyses/dauvergne_protocol.py", line 246, in __init__ >>>>>>>>>>>>>>>>>> self.execute() >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/auto_a >>>>>>>>>>>>>>>>>> nalyses/dauvergne_protocol.py", line 600, in execute >>>>>>>>>>>>>>>>>> self.multi_model(local_tm=True) >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/auto_a >>>>>>>>>>>>>>>>>> nalyses/dauvergne_protocol.py", line 888, in multi_model >>>>>>>>>>>>>>>>>> self.interpreter.minimise.grid >>>>>>>>>>>>>>>>>> _search(inc=self.grid_inc) >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/prompt/uf_objects.py", >>>>>>>>>>>>>>>>>> line 225, in __call__ >>>>>>>>>>>>>>>>>> self._backend(*new_args, **uf_kargs) >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/pipe_control/minimise.py", >>>>>>>>>>>>>>>>>> line 172, in grid_search >>>>>>>>>>>>>>>>>> model_lower, model_upper, model_inc = >>>>>>>>>>>>>>>>>> grid_setup(lower, upper, inc, verbosity=verbosity, >>>>>>>>>>>>>>>>>> skip_preset=skip_preset) >>>>>>>>>>>>>>>>>> File "/home/sam2/relax-4.0.2/pipe_control/minimise.py", >>>>>>>>>>>>>>>>>> line 341, in grid_setup >>>>>>>>>>>>>>>>>> elif values[i] in [None, {}, []]: >>>>>>>>>>>>>>>>>> IndexError: index 0 is out of bounds for axis 0 with size >>>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>>> I should mention this error pops up when it decided to >>>>>>>>>>>>>>>>>> calculate the first spins upper and lower bounds. So this >>>>>>>>>>>>>>>>>> isn't at the >>>>>>>>>>>>>>>>>> minimization portion of the calculation (like in the >>>>>>>>>>>>>>>>>> previous bug). Thanks >>>>>>>>>>>>>>>>>> in advance. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Sincerely, >>>>>>>>>>>>>>>>>> Sam >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Wed, Sep 14, 2016 at 6:34 AM, Troels Emtekær Linnet < >>>>>>>>>>>>>>>>>> tlin...@nmr-relax.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi Sam. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> To tackle this problem, I would advice to create another >>>>>>>>>>>>>>>>>>> bug. >>>>>>>>>>>>>>>>>>> Creation and closing of a bug "leaves trails", which >>>>>>>>>>>>>>>>>>> maybe will help another person, when googling for the same >>>>>>>>>>>>>>>>>>> problem. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> To help you, can you do a "relax -i" on both computers? >>>>>>>>>>>>>>>>>>> That give some indication about package versions and >>>>>>>>>>>>>>>>>>> computer setup. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> The first thing we need to establish, is that mpirun is >>>>>>>>>>>>>>>>>>> working. >>>>>>>>>>>>>>>>>>> We have to test the installation without relax. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Can you have a look at: >>>>>>>>>>>>>>>>>>> http://wiki.nmr-relax.com/OpenMPI >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Try the different things like: >>>>>>>>>>>>>>>>>>> lscpu >>>>>>>>>>>>>>>>>>> mpirun --report-bindings -np 11 echo "hello world" >>>>>>>>>>>>>>>>>>> mpirun --report-bindings -np 4 relax --multi='mpi4py' >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> When we are confident about this, then we will try make >>>>>>>>>>>>>>>>>>> a small test script for relax. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Please try these things at both computers, and provide 2 >>>>>>>>>>>>>>>>>>> files with commands and output. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Then attach it to the bug report. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2016-09-14 6:40 GMT+02:00 Mahdi, Sam < >>>>>>>>>>>>>>>>>>> sam.mahdi....@my.csun.edu>: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi Troels, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> So I saw the tutorial you put, and the main problem was >>>>>>>>>>>>>>>>>>>> I had not specified my data was only for the Nitrogen >>>>>>>>>>>>>>>>>>>> spins. After applying >>>>>>>>>>>>>>>>>>>> the spin column, my data loaded and relax ran model free >>>>>>>>>>>>>>>>>>>> with no problem. I >>>>>>>>>>>>>>>>>>>> have a script that starts and runs relax and model free >>>>>>>>>>>>>>>>>>>> all automatic, if >>>>>>>>>>>>>>>>>>>> you wish I can send it via email to you and you can upload >>>>>>>>>>>>>>>>>>>> it to the >>>>>>>>>>>>>>>>>>>> tutorial wiki page. So I can successfully run model-free >>>>>>>>>>>>>>>>>>>> in script mode for >>>>>>>>>>>>>>>>>>>> a uni-processor. >>>>>>>>>>>>>>>>>>>> The problem now with the multi-processor is that the >>>>>>>>>>>>>>>>>>>> script won't load. In the bug page I uploaded a screenshot >>>>>>>>>>>>>>>>>>>> where I had >>>>>>>>>>>>>>>>>>>> input the 'mpirun -np 4 ../relax --multi='mpi4py' command, >>>>>>>>>>>>>>>>>>>> however I had no >>>>>>>>>>>>>>>>>>>> output. I checked processes running in the background, and >>>>>>>>>>>>>>>>>>>> saw that there >>>>>>>>>>>>>>>>>>>> was indeed 4 processess running in the background (1 >>>>>>>>>>>>>>>>>>>> master and 3 slaves) >>>>>>>>>>>>>>>>>>>> for relax; but there was no output, so I was unable to >>>>>>>>>>>>>>>>>>>> load any data, or >>>>>>>>>>>>>>>>>>>> create a pipe or anything. This was only on the Fedora 24 >>>>>>>>>>>>>>>>>>>> computer, not the >>>>>>>>>>>>>>>>>>>> Fedora 20. On the Fedora 20 computer, I was able to >>>>>>>>>>>>>>>>>>>> successfully open relax >>>>>>>>>>>>>>>>>>>> on a multi processor platform. I can send the screenshots >>>>>>>>>>>>>>>>>>>> and the relax -i >>>>>>>>>>>>>>>>>>>> for both computers again. I don't know why it doesn't work >>>>>>>>>>>>>>>>>>>> the fedora 24. >>>>>>>>>>>>>>>>>>>> Do you know what could be causing this? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Thanks again in advance >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Tue, Sep 13, 2016 at 9:32 PM, Troels Emtekær Linnet >>>>>>>>>>>>>>>>>>>> <tlin...@nmr-relax.com> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hi Sam >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Can you send the mail again and include the maillist? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Best Troels >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Den tirsdag den 13. september 2016 skrev Mahdi, Sam < >>>>>>>>>>>>>>>>>>>>> sam.mahdi....@my.csun.edu>: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> HI Troels, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> So I saw the tutorial you put, and the main problem >>>>>>>>>>>>>>>>>>>>>> was I had not specified my data was only for the >>>>>>>>>>>>>>>>>>>>>> Nitrogen spins. After >>>>>>>>>>>>>>>>>>>>>> applying the spin column, my data loaded and relax ran >>>>>>>>>>>>>>>>>>>>>> model free with no >>>>>>>>>>>>>>>>>>>>>> problem. I have a script that starts and runs relax and >>>>>>>>>>>>>>>>>>>>>> model free all >>>>>>>>>>>>>>>>>>>>>> automatic, if you wish I can send it via email to you >>>>>>>>>>>>>>>>>>>>>> and you can upload it >>>>>>>>>>>>>>>>>>>>>> to the tutorial wiki page. So I can successfully run >>>>>>>>>>>>>>>>>>>>>> model-free in script >>>>>>>>>>>>>>>>>>>>>> mode for a uni-processor. >>>>>>>>>>>>>>>>>>>>>> The problem now with the multi-processor is that the >>>>>>>>>>>>>>>>>>>>>> script won't load. In the bug page I uploaded a >>>>>>>>>>>>>>>>>>>>>> screenshot where I had >>>>>>>>>>>>>>>>>>>>>> input the 'mpirun -np 4 ../relax --multi='mpi4py' >>>>>>>>>>>>>>>>>>>>>> command, however I had no >>>>>>>>>>>>>>>>>>>>>> output. I checked processes running in the background, >>>>>>>>>>>>>>>>>>>>>> and saw that there >>>>>>>>>>>>>>>>>>>>>> was indeed 4 processess running in the background (1 >>>>>>>>>>>>>>>>>>>>>> master and 3 slaves) >>>>>>>>>>>>>>>>>>>>>> for relax; but there was no output, so I was unable to >>>>>>>>>>>>>>>>>>>>>> load any data, or >>>>>>>>>>>>>>>>>>>>>> create a pipe or anything. This was only on the Fedora >>>>>>>>>>>>>>>>>>>>>> 24 computer, not the >>>>>>>>>>>>>>>>>>>>>> Fedora 20. On the Fedora 20 computer, I was able to >>>>>>>>>>>>>>>>>>>>>> successfully open relax >>>>>>>>>>>>>>>>>>>>>> on a multi processor platform. I can send the >>>>>>>>>>>>>>>>>>>>>> screenshots and the relax -i >>>>>>>>>>>>>>>>>>>>>> for both computers again. I don't know why it doesn't >>>>>>>>>>>>>>>>>>>>>> work the fedora 24. >>>>>>>>>>>>>>>>>>>>>> Do you know what could be causing this? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Thanks again in advance >>>>>>>>>>>>>>>>>>>>>> Sam >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Tue, Sep 13, 2016 at 1:01 PM, Troels Emtekær >>>>>>>>>>>>>>>>>>>>>> Linnet <tlin...@nmr-relax.com> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hi Sam. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I closed the 2 bug reports as invalid. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> The data is not labelled correct. >>>>>>>>>>>>>>>>>>>>>>> But this can be corrected. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Please see this tutorial I wrote: >>>>>>>>>>>>>>>>>>>>>>> http://wiki.nmr-relax.com/Tuto >>>>>>>>>>>>>>>>>>>>>>> rial_for_model-free_analysis_sam_mahdi >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I hope this give some guidance. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> If you experience any new problems, please feel free >>>>>>>>>>>>>>>>>>>>>>> to ask!! >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> What you experience, will probably be the same for >>>>>>>>>>>>>>>>>>>>>>> many. >>>>>>>>>>>>>>>>>>>>>>> Your feedback is valuable for the development. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Please wait with using mpirun and multiple >>>>>>>>>>>>>>>>>>>>>>> processors, before you are absolutely sure >>>>>>>>>>>>>>>>>>>>>>> that it will run on 1 processor. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Bugfixing when using multiple processors is a >>>>>>>>>>>>>>>>>>>>>>> nightmare.... >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Best >>>>>>>>>>>>>>>>>>>>>>> Troels >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2016-09-12 17:36 GMT+02:00 Mahdi, Sam < >>>>>>>>>>>>>>>>>>>>>>> sam.mahdi....@my.csun.edu>: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hi Troels, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I just created another bug report. I simply copy >>>>>>>>>>>>>>>>>>>>>>>> pasted the email, and uploaded the script files there. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Sincerely, >>>>>>>>>>>>>>>>>>>>>>>> Sam >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Mon, Sep 12, 2016 at 5:14 AM, Troels Emtekær >>>>>>>>>>>>>>>>>>>>>>>> Linnet <tlin...@nmr-relax.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Hi Sam. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Can you produce another bug report. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Please don't attach files to these mails as it >>>>>>>>>>>>>>>>>>>>>>>>> will strain the mailinglists. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Cheers >>>>>>>>>>>>>>>>>>>>>>>>> Troels >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Den lørdag den 10. september 2016 skrev Mahdi, Sam >>>>>>>>>>>>>>>>>>>>>>>>> <sam.mahdi....@my.csun.edu>: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hi Troels, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Additional question that I had, if you could also >>>>>>>>>>>>>>>>>>>>>>>>>> look into this as well on Tuesday please. I have >>>>>>>>>>>>>>>>>>>>>>>>>> decided to try to write a >>>>>>>>>>>>>>>>>>>>>>>>>> script to automate this whole process (since I won't >>>>>>>>>>>>>>>>>>>>>>>>>> be using the gui to do >>>>>>>>>>>>>>>>>>>>>>>>>> model free), and I've come across a problem. I can >>>>>>>>>>>>>>>>>>>>>>>>>> successfully open up >>>>>>>>>>>>>>>>>>>>>>>>>> relax using openmpi, and can load the pdb file, and >>>>>>>>>>>>>>>>>>>>>>>>>> assign all the spins >>>>>>>>>>>>>>>>>>>>>>>>>> and isotopes; however, it appears it will only load >>>>>>>>>>>>>>>>>>>>>>>>>> one data file (the very >>>>>>>>>>>>>>>>>>>>>>>>>> first one I'll have inputed in the script). I don't >>>>>>>>>>>>>>>>>>>>>>>>>> know if there is a >>>>>>>>>>>>>>>>>>>>>>>>>> problem with how I wrote my script. Not only will it >>>>>>>>>>>>>>>>>>>>>>>>>> not load the rest of >>>>>>>>>>>>>>>>>>>>>>>>>> my data sets, it won't actually run dAuvergne's >>>>>>>>>>>>>>>>>>>>>>>>>> protocol either, it'll just >>>>>>>>>>>>>>>>>>>>>>>>>> load the data set and exit out of the program. >>>>>>>>>>>>>>>>>>>>>>>>>> Attached is the script I >>>>>>>>>>>>>>>>>>>>>>>>>> wrote for relax. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> This is the output once relax has loaded >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> script = 'model_free_sample_script.py' >>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------- >>>>>>>>>>>>>>>>>>>>>>>>>> from time import asctime, localtime >>>>>>>>>>>>>>>>>>>>>>>>>> from auto_analyses.dauvergne_protocol import >>>>>>>>>>>>>>>>>>>>>>>>>> dAuvergne_protocol >>>>>>>>>>>>>>>>>>>>>>>>>> DIFF_MODEL=['local_tm','sphere >>>>>>>>>>>>>>>>>>>>>>>>>> ','prolate','oblate','ellipsoid','final'] >>>>>>>>>>>>>>>>>>>>>>>>>> MF_MODELS=['m0','m1','m2','m3' >>>>>>>>>>>>>>>>>>>>>>>>>> ,'m4','m5','m6','m7','m8','m9'] >>>>>>>>>>>>>>>>>>>>>>>>>> LOCAL_TM_MODELS=['tm0','tm1',' >>>>>>>>>>>>>>>>>>>>>>>>>> tm2','tm3','tm4','tm5','tm6',' >>>>>>>>>>>>>>>>>>>>>>>>>> tm7','tm7','tm8','tm9'] >>>>>>>>>>>>>>>>>>>>>>>>>> GRID_INC=11 >>>>>>>>>>>>>>>>>>>>>>>>>> MIN_ALGOR='newton' >>>>>>>>>>>>>>>>>>>>>>>>>> MC_NUM=500 >>>>>>>>>>>>>>>>>>>>>>>>>> CONV_LOOP=True >>>>>>>>>>>>>>>>>>>>>>>>>> pipe_bundle="mf(%s)"%asctime(localtime()) >>>>>>>>>>>>>>>>>>>>>>>>>> name="origin-"+pipe_bundle >>>>>>>>>>>>>>>>>>>>>>>>>> pipe.create(name,'mf',bundle=pipe_bundle) >>>>>>>>>>>>>>>>>>>>>>>>>> structure.read_pdb('2d9j.pdb', >>>>>>>>>>>>>>>>>>>>>>>>>> set_mol_name='hRGS7') >>>>>>>>>>>>>>>>>>>>>>>>>> structure.load_spins('@N',ave_pos=True) >>>>>>>>>>>>>>>>>>>>>>>>>> structure.load_spins('@NE1',ave_pos=True) >>>>>>>>>>>>>>>>>>>>>>>>>> structure.load_spins('@H',ave_pos=True) >>>>>>>>>>>>>>>>>>>>>>>>>> structure.load_spins('@HE1',ave_pos=True) >>>>>>>>>>>>>>>>>>>>>>>>>> spin.isotope('15N',spin_id='@N*') >>>>>>>>>>>>>>>>>>>>>>>>>> spin.isotope('1H',spin_id='@H*') >>>>>>>>>>>>>>>>>>>>>>>>>> relax_data.read(ri_id='R1_Agne >>>>>>>>>>>>>>>>>>>>>>>>>> s',ri_type='R1',frq=599.642*1e6, >>>>>>>>>>>>>>>>>>>>>>>>>> file='R1_Agnes',res_num_col=1, >>>>>>>>>>>>>>>>>>>>>>>>>> data_col=2,error_col=3) >>>>>>>>>>>>>>>>>>>>>>>>>> relax_data.read(ri_id='R2_Agne >>>>>>>>>>>>>>>>>>>>>>>>>> s',ri_type='R2',frq=599.642*1e6, >>>>>>>>>>>>>>>>>>>>>>>>>> file='R2_Agnes',res_num_col=1, >>>>>>>>>>>>>>>>>>>>>>>>>> data_col=2,error_col=3) >>>>>>>>>>>>>>>>>>>>>>>>>> relax_data.read(ri_id='ssNOE_A >>>>>>>>>>>>>>>>>>>>>>>>>> gnes',ri_type='NOE',frq=599.642*1e6, >>>>>>>>>>>>>>>>>>>>>>>>>> file='ssNOE_Agnes',res_num_col >>>>>>>>>>>>>>>>>>>>>>>>>> =1,data_col=2,error_col=3) >>>>>>>>>>>>>>>>>>>>>>>>>> relax_data.read(ri_id='R1_NMRF >>>>>>>>>>>>>>>>>>>>>>>>>> AM',ri_type='R1',frq=799.642*1e6, >>>>>>>>>>>>>>>>>>>>>>>>>> file='R1_NMRFAM',res_num_col=1 >>>>>>>>>>>>>>>>>>>>>>>>>> ,data_col=2,error_col=3) >>>>>>>>>>>>>>>>>>>>>>>>>> relax_data.read(ri_id='R2_NMRF >>>>>>>>>>>>>>>>>>>>>>>>>> AM',ri_type='R2',frq=799.642*1e6, >>>>>>>>>>>>>>>>>>>>>>>>>> file='R2_NMRFAM',res_num_col=1 >>>>>>>>>>>>>>>>>>>>>>>>>> ,data_col=2,error_col=3) >>>>>>>>>>>>>>>>>>>>>>>>>> relax_data.read(ri_id='ssNOE_N >>>>>>>>>>>>>>>>>>>>>>>>>> MRFAM',ri_type='NOE',frq=799.642*1e6, >>>>>>>>>>>>>>>>>>>>>>>>>> file='ssNOE_NMRFAM',res_num_co >>>>>>>>>>>>>>>>>>>>>>>>>> l=1,data_col=2,error_col=3) >>>>>>>>>>>>>>>>>>>>>>>>>> interatom.define(spin_id1='@N',spin_id2='@H', >>>>>>>>>>>>>>>>>>>>>>>>>> direct_bond=True) >>>>>>>>>>>>>>>>>>>>>>>>>> interatom.define(spin_id1='@NE1',spin_id2='@HE1', >>>>>>>>>>>>>>>>>>>>>>>>>> direct_bond=True) >>>>>>>>>>>>>>>>>>>>>>>>>> interatom.set_dist(spin_id1='@ >>>>>>>>>>>>>>>>>>>>>>>>>> N*',spin_id2='@H*',ave_dist=1.02*1e-10) >>>>>>>>>>>>>>>>>>>>>>>>>> interatom.unit_vectors() >>>>>>>>>>>>>>>>>>>>>>>>>> value.set(-172*1e-6,'csa',spin_id='@N*') >>>>>>>>>>>>>>>>>>>>>>>>>> dAuvergne_protocol(pipe_name=n >>>>>>>>>>>>>>>>>>>>>>>>>> ame,pipe_bundle=pipe_bundle,di >>>>>>>>>>>>>>>>>>>>>>>>>> ff_model=DIFF_MODEL,mf_models= >>>>>>>>>>>>>>>>>>>>>>>>>> MF_MODELS,local_tm_models=LOCA >>>>>>>>>>>>>>>>>>>>>>>>>> L_TM_MODELS,grid_inc=GRID_INC, >>>>>>>>>>>>>>>>>>>>>>>>>> min_algor=MIN_ALGOR,mc_sim_num >>>>>>>>>>>>>>>>>>>>>>>>>> =MC_NUM,conv_loop=CONV_LOOP) >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> So it indicates that my script has loaded. >>>>>>>>>>>>>>>>>>>>>>>>>> However, after it loads the spins from the pdb file, >>>>>>>>>>>>>>>>>>>>>>>>>> this is what happens >>>>>>>>>>>>>>>>>>>>>>>>>> after my first data set has been loaded: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> relax> relax_data.read(ri_id='R1_Agnes', >>>>>>>>>>>>>>>>>>>>>>>>>> ri_type='R1', frq=599642000.0, file='R1_Agnes', >>>>>>>>>>>>>>>>>>>>>>>>>> dir=None, spin_id_col=None, >>>>>>>>>>>>>>>>>>>>>>>>>> mol_name_col=None, res_num_col=1, res_name_col=None, >>>>>>>>>>>>>>>>>>>>>>>>>> spin_num_col=None, >>>>>>>>>>>>>>>>>>>>>>>>>> spin_name_col=None, data_col=2, error_col=3, >>>>>>>>>>>>>>>>>>>>>>>>>> sep=None, spin_id=None) >>>>>>>>>>>>>>>>>>>>>>>>>> Opening the file 'R1_Agnes' for reading. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['Residue', 'R1', 'Error'] is invalid, the residue >>>>>>>>>>>>>>>>>>>>>>>>>> number data 'Residue' is >>>>>>>>>>>>>>>>>>>>>>>>>> invalid. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line ['1'] >>>>>>>>>>>>>>>>>>>>>>>>>> is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line ['2'] >>>>>>>>>>>>>>>>>>>>>>>>>> is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line ['3'] >>>>>>>>>>>>>>>>>>>>>>>>>> is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line ['4'] >>>>>>>>>>>>>>>>>>>>>>>>>> is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line ['5'] >>>>>>>>>>>>>>>>>>>>>>>>>> is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line ['6'] >>>>>>>>>>>>>>>>>>>>>>>>>> is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line ['7'] >>>>>>>>>>>>>>>>>>>>>>>>>> is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line ['8'] >>>>>>>>>>>>>>>>>>>>>>>>>> is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line ['9'] >>>>>>>>>>>>>>>>>>>>>>>>>> is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['10'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['11'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['16'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['17'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['18'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['21'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['22'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['23'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['26'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['27'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['28'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['31'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['40'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['46'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['58'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['61'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['62'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['63'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['73'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['76'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['79'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['81'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['82'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['85'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['94'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['97'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['99'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['106'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['115'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['121'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['126'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['127'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['134'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['135'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['136'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['137'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the line >>>>>>>>>>>>>>>>>>>>>>>>>> ['139'] is invalid, the data is missing. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> RelaxError: The spin ID '#hRGS7:12' corresponds >>>>>>>>>>>>>>>>>>>>>>>>>> to multiple spins, including '#hRGS7:12@N' and >>>>>>>>>>>>>>>>>>>>>>>>>> '#hRGS7:12@H'. >>>>>>>>>>>>>>>>>>>>>>>>>> crowlab: [~/relax-4.0.2]> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> As you can see, I have all 6 data sets set to >>>>>>>>>>>>>>>>>>>>>>>>>> load, but only the very first one appears to do so, >>>>>>>>>>>>>>>>>>>>>>>>>> and after it loads, it >>>>>>>>>>>>>>>>>>>>>>>>>> just exits out of relax. Again, I don't know if this >>>>>>>>>>>>>>>>>>>>>>>>>> is a problem with how >>>>>>>>>>>>>>>>>>>>>>>>>> I wrote the script. The Relax_script1 is the one >>>>>>>>>>>>>>>>>>>>>>>>>> that I load up to run the >>>>>>>>>>>>>>>>>>>>>>>>>> whole thing. The model free script.py is just the >>>>>>>>>>>>>>>>>>>>>>>>>> script it reads once >>>>>>>>>>>>>>>>>>>>>>>>>> relax has opened up. Again, I can see all the spins >>>>>>>>>>>>>>>>>>>>>>>>>> are properly loaded, >>>>>>>>>>>>>>>>>>>>>>>>>> and the isotopes are set. It just everything after >>>>>>>>>>>>>>>>>>>>>>>>>> the first data set that >>>>>>>>>>>>>>>>>>>>>>>>>> doesn't load. Thanks again in advance. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely, >>>>>>>>>>>>>>>>>>>>>>>>>> Sam >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Sep 8, 2016 at 10:15 AM, Mahdi, Sam < >>>>>>>>>>>>>>>>>>>>>>>>>> sam.mahdi....@my.csun.edu> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Troels, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you so much. If there is any extra info >>>>>>>>>>>>>>>>>>>>>>>>>>> you need please let me know. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely, >>>>>>>>>>>>>>>>>>>>>>>>>>> Sam >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Sep 8, 2016 at 9:12 AM, Troels Emtekær >>>>>>>>>>>>>>>>>>>>>>>>>>> Linnet <tlin...@nmr-relax.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Sam. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> I will have some time on Tuesday, and then I >>>>>>>>>>>>>>>>>>>>>>>>>>>> will look at it. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Best >>>>>>>>>>>>>>>>>>>>>>>>>>>> Troels >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Den onsdag den 7. september 2016 skrev Mahdi, >>>>>>>>>>>>>>>>>>>>>>>>>>>> Sam <sam.mahdi....@my.csun.edu>: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Troels, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I uploaded all the files, and even added in >>>>>>>>>>>>>>>>>>>>>>>>>>>>> the entire output that i recieved using model >>>>>>>>>>>>>>>>>>>>>>>>>>>>> free in script mode. I didn't >>>>>>>>>>>>>>>>>>>>>>>>>>>>> know if all the files uploaded need to have that >>>>>>>>>>>>>>>>>>>>>>>>>>>>> link, so only the initial >>>>>>>>>>>>>>>>>>>>>>>>>>>>> files that were uploaded it, have it. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance for your help! >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sam >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Sep 7, 2016 at 12:41 AM, Troels >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Emtekær Linnet <tlin...@nmr-relax.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Sam. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You should be able to upload more files after >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the initial upload. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> In the comment thread, please also make a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> link to this discussion. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://mail.gna.org/public/re >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> lax-users/2016-09/threads.html#00001 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Troels >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2016-09-06 19:10 GMT+02:00 Mahdi, Sam < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sam.mahdi....@my.csun.edu>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your reply. When I come to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> upload my data though, I see there are only 4 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> available slots I can upload >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> my data. I have a total of 6 data files >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> however, that need to be uploaded >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (3 of each frequency). I also need to upload >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the relax -i of 2 different >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> computers, and the script file I've been using >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for a total of 9 files that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> need to be uploaded. Is there a way to increase >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the amount I can upload, or >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can I upload more after the initial submission? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Sep 5, 2016 at 2:46 AM, Troels >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Emtekær Linnet <tlin...@nmr-relax.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Sam. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To solve this problem, it would be easier >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to have access to some of your data. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you upload to: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://gna.org/bugs/?group=relax >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Take each of your data files, and delete >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> all data, except 2 spins. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Also provide your script file, or a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> description of which button you press in the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GUI. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please also provide information about your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> system with: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> relax -i >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then I will make a tutorial for you. To be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> added here: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://wiki.nmr-relax.com/Cate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> gory:Tutorials >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If there is a problem in relax, I will >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> write a systemtest which will solve the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problem. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> And the problem will never return. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If this a user error, the tutorial should >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> help to prevent this, and would be the first >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> step before >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> adding/modifying the manual. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Regarding using mpirun. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Have a look at this page. Maybe it helps. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://wiki.nmr-relax.com/OpenMPI >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cheers. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2016-09-03 4:13 GMT+02:00 Mahdi, Sam < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sam.mahdi....@my.csun.edu>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello everyone, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> So I was able to set up and run the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dauvergne_protocol successfully by >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> using the script in the wiki. The problem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have come across now is the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> program doesn't seem to read my data. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Using the gui interface I was able to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> successfully load my data and run it. When >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I upload my data using the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> script command: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> relax_data.read(ri_id='R1_Agne >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> s',ri_type='R1',frq=599.642*1e6, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file='R1_Agnes',res_num_col=1, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> data_col=2,error_col=3) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The output file simply gives errors for >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> amino acids I don't have data for: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The sequence data in the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> line ['1'] is invalid, the data is >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> missing. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is fine as relax just ignores these >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> values and continues its >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> calculations. I only receive this warning >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for values I don't have data for. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is the same thing I got when using >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the gui interface (the gui however >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> showed my values that I have data for and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the residue it corresponds to, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> using the script I don't receive such an >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> output, I don't know whether this >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is normal or not). However, since I don't >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> get this warning for every amino >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> acid, I assume this means it has read the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> values for the other amino acids. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> All of my data is the same, relax warnings >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> only pop up for amino acids that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I don't have data for. The problem is, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> when I enter the dAuvergne protocol, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I get the protocol working, it starts >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> running local_tm however it appears >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> none of my data has been uploaded: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The spin '#hRGS7:2@N' has >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> been deselected because of missing >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> relaxation data >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> RelaxWarning: The spin '#hRGS7:3@N' has >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> been deselected because of missing >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> relaxation data >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> And I get that warning for every single >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> amino acid. From the output, it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> appears to have read the file since it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> knows exactly which amino acids I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> don't have data for, but I don't know why >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> when it comes to running the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> protocol, it tells me I havn't inputed any >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> data. I have typed everything >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directly according to the script from the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wiki. From running the protoco, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it appears everything has properly been >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> uploaded, structure data, magnetic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dipole interactions, csa, the data pipe, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the analysis variables, the python >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> module imports, and setting up the spins >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from the pdb file. It appears the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> only error is from loading the actual >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> relaxation data. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On a completely unrelated side note, I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have been attempting to run relax on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> multiple processors. I have tried 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different computers, both fedora linux. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have mpi4py and openmpi downloaded on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> both. On one, I can get relax on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> multiple cores working (havn't been able >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to successfully run it due to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> being unable to upload any data properly). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On the other however, I type in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the mpirun -np --multi='mpi4py' script, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> but I get no output. I can see that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it's running in the background (top >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> command), but nothing pops up, no text >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> command, nothing. I typed the same mpirun >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with the --gui, but that opened >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> up nothing. On a uni-processor (typing in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the exact same command without >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> indicating how many cores i.e. no -np >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --multi='mpi4py') it works just fine, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> so I don't think its my openmpi that's an >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> issue. I don't know whether this >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is an issue with my mpi4py or a personal >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> computer issue (since on the other >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> computer relax runs just fine on multiple >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cores). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sam >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> P.S. when I do enter the top command to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> see what's running. My master shows >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> mpirun, and the 3 slaves display python >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> when I put -np 4, so I know >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> something is running in the background. I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have 8 cores. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 31, 2016 at 6:49 PM, Mahdi, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sam <sam.mahdi....@my.csun.edu> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > Hello everyone, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > I am attempting to run relax on a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> multi-processor mode. I have been able >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > to successfully set-up relax to operate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in a multi-processor mode by using >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > the mpirun -np #ofprocessors >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /location/of/relax --multi='mpi4py' >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > The problem I encounter is when using >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the --tee log dauvergne_protocol.py >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > command. I receive this error >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > RelaxError: the script file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'dauvergne_protocol.py' does not exist >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > I located the script file and tried to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> direct to it's path >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > mpirun /usr/local/Relax/relax-2.2.5/relax >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --multi='mpi4py' --tee log >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > /usr/local/Relax/relax-2.2.5/a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> uto-analyses/dauvergne_protocol.py >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > But i received this error >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > RelaxError: the script file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> '/usr/local/Relax/relax-2.2.5/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > auto-analyses/dauvergne_protocol.py' >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> does not exist. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > Even though I have the script, it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> doesn't seem to be able to locate it. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > On a side note, in the manual, one dash >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> doesn't actually run the command. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > I.e. in the manual it displays >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -multi='mpi4py' . What it should be is >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > --multi='mpi4py' . The same goes for >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -tee. It should be --tee. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > Sincerely, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > Sam >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ______________________________ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _________________ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> relax (http://www.nmr-relax.com) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is the relax-users mailing list >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> relax-users@gna.org >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To unsubscribe from this list, get a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> password >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> reminder, or change your subscription >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> options, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> visit the list information page at >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://mail.gna.org/listinfo/relax-users >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> > _______________________________________________ relax (http://www.nmr-relax.com) This is the relax-users mailing list relax-users@gna.org To unsubscribe from this list, get a password reminder, or change your subscription options, visit the list information page at https://mail.gna.org/listinfo/relax-users
