ChangeLog
=========
2014-08-27 Sebastian Dröge <[email protected]>
* configure.ac:
releasing 1.4.1
2014-08-21 14:02:16 +0100 Tim-Philipp Müller <[email protected]>
* plugins/elements/gstqueue.c:
queue: fix race when flush-stop event comes in whilst shutting down
Don't re-start the queue push task on the source pad when a
flush-stop event comes in and we're in the process of shutting
down, otherwise that task will never be stopped again.
When the element is set to READY state, the pads get de-activated.
The source pad gets deactivated before the queue's own activate_mode
function on the source pads gets called (which will stop the thread),
so checking whether the pad is active before re-starting the task on
receiving flush-stop should be fine. The problem would happen when the
flush-stop handler was called just after the queue's activate mode
function had stopped the task.
Spotted and debugged by Linus Svensson <[email protected]>
https://bugzilla.gnome.org/show_bug.cgi?id=734688
2014-08-14 18:53:40 -0300 Thiago Santos <[email protected]>
* plugins/elements/gstinputselector.c:
inputselector: always proxy caps query
Otherwise it would only be proxied for the active pad which can lead
upstream to use an incompatible caps for the downstream element.
Even if a reconfigure event is sent upstream when the pad is
activated, this
will save the caps reconfiguration if it is already using an
acceptable caps.
2014-08-14 14:37:56 +0100 Tim-Philipp Müller <[email protected]>
* libs/gst/base/gstdataqueue.h:
base: and fix build with new g-i again
2014-08-14 14:25:06 +0100 Tim-Philipp Müller <[email protected]>
* libs/gst/base/gstdataqueue.h:
base: remove g-i annotation that makes older g-ir-scanner crash
Just remove one skip annotation that causes this:
** (g-ir-compiler:12458): ERROR **: Caught NULL node, parent=empty
with older g-i versions such as 1.32.1.
2014-08-13 13:01:23 +0300 Sebastian Dröge <[email protected]>
* plugins/elements/gstmultiqueue.c:
multiqueue: Only handle flow returns < EOS as errors, not e.g.
flushing
2014-08-13 12:40:37 +0300 Sebastian Dröge <[email protected]>
* gst/gstbin.c:
bin: Use allow-none instead of nullable until we depend on a new
enough GI version
2014-08-13 12:39:47 +0300 Sebastian Dröge <[email protected]>
* gst/gstbin.c:
bin: gst_bin_new() can accept NULL as name
2014-08-13 12:37:08 +0300 Sebastian Dröge <[email protected]>
* gst/gstelement.c:
element: Clarify docs about gst_element_get_request_pad() and remove
deprecation part
This function is not really pad or slow for the common case of
requesting a
pad with the name of the template. It is only slower if you to name
your pads
directly instead of letting the element handle it.
Also there's no reason to deprecate it in favor of a more complicated
function
for the common case.
2014-08-13 12:20:51 +0300 Sebastian Dröge <[email protected]>
* plugins/elements/gstqueue2.c:
queue2: Post errors if we receive EOS after downstream reported an
error
There will be no further data flow that would allow us to propagate
the
error upstream, causing nobody at all to post an error message.
2014-08-13 12:15:03 +0300 Sebastian Dröge <[email protected]>
* plugins/elements/gstqueue.c:
queue: Post errors when receiving EOS after downstream returned an
error
There might be no further data flow that would allow us to propagate
the
error upstream, causing nobody to post an error at all.
2014-08-13 12:10:39 +0300 Sebastian Dröge <[email protected]>
* plugins/elements/gstmultiqueue.c:
multiqueue: Post errors ourselves if they are received after EOS
After EOS there will be no further buffer which could propagate the
error upstream, so nothing is going to post an error message and
the pipeline just idles around.
2014-07-27 03:06:16 +0000 Руслан Ижбулатов <[email protected]>
* gst/gstpoll.c:
poll: Prevent false-negative from WAKE_EVENT() on W32
SetEvent() seems to not call SetLastError(0) internally, so checking
last
error after calling SetEvent() may return the error from an earlier
W32 API
call. Fix this by calling SetlastError(0) explicitly.
Currently WAKE_EVENT() code is cramped into a macro and doesn't look
to be
entirely correct. Particularly, it does not check the return value of
SetEvent(), only the thread-local W32 error value. It is likely that
SetEvent()
actually just returns non-zero value, but the code mistakenly thinks
that the
call has failed, because GetLastError() seems to indicate so.
https://bugzilla.gnome.org/show_bug.cgi?id=733805
2014-07-30 15:46:22 +0300 Mohammed Sameer <[email protected]>
* gst/gstbufferpool.c:
bufferpool: Add missing error checking to default_alloc_buffer()
default_alloc_buffer() calls gst_buffer_new_allocate() but does not
check for
failed allocation.
This patch makes default_alloc_buffer() return an error
(GST_FLOW_ERROR) if
buffer allocation fails.
https://bugzilla.gnome.org/show_bug.cgi?id=733974
2014-07-29 14:21:33 -0300 Thiago Santos <[email protected]>
* plugins/elements/gstmultiqueue.c:
multiqueue: avoid using infinite buffers limit if finite is requested
If the current max-buffers limit it infinite and a finite value is
requested, switch to the MAX (requested, current-value) to set some
limit but not below what we know that we've needed so far.
https://bugzilla.gnome.org/show_bug.cgi?id=733837
2014-07-24 22:02:58 +0200 Sebastian Rasmussen <[email protected]>
* gst/parse/grammar.y:
parse: Unref reference to enclosing bins
Previously all reference to enclosing bins of an element were leaked
when doing delaying setting a property.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=733697
2014-07-26 14:42:54 +0100 Tim-Philipp Müller <[email protected]>
* gst/gst.h:
gst: include atomicqueue.h again in gst.h
It's a public header of gstreamer core, so #include <gst/gst.h>
should make the API available.
2014-07-09 15:48:10 +0200 Srimanta Panda <[email protected]>
* plugins/elements/gstfunnel.c:
funnel: Fix for racy EOS event handling
When eos events are forwarded simultaneouly from two sinkpads on
funnel, it doesnot forward the eos to sourcepad. The reason is
sticky events are stored after the event callbacks are returned.
Therefore while one is about to store the sticky events on the its
sinkpad, other sinkpad starts checking for the eos events on all other
sinkpads and assumes eos is not present yet.
https://bugzilla.gnome.org/show_bug.cgi?id=732851
Download
========
https://download.gnome.org/sources/gstreamer/1.4/gstreamer-1.4.1.tar.xz (3.17M)
sha256sum: 5638f75003282135815c0077d491da11e9a884ad91d4ba6ab3cc78bae0fb452e
_______________________________________________
[email protected]
https://mail.gnome.org/mailman/listinfo/release-team
Release-team lurker? Do NOT participate in discussions.
