If you contact Dean (Monday) he has all the old and new D.B. products info on a CD or on his hard drive. May be he would look up the info and send it to you via e-mail. 73 Russ,
----- Original Message ----- From: "skipp025" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, January 30, 2005 12:36 PM Subject: [Repeater-Builder] Re: Close space transmitter combiner?? > > > Hi James, > > With Andrew buying Decibel, their older data sheets > are sure to become scarce. Some time ago I posted > the url and a promting to "download while you can > message." > > Email me direct and I'll send you pdf copies of > information. > > cheers > skipp > > skipp025 at yahoo.com > > www.radiowrench.com/sonic > > > James <[EMAIL PROTECTED]> wrote: > > The hybrid is the square four port type, and it has two > > tuning caps labeled as "antenna tuning". I did look at > > the andrews site for this information without any luck. > > What URL are you using. > > > > James > > > > skipp025 wrote: > > > > >All the information is available on the Andrew > > >Decibel web site if you hunt it down. > > > > > >If the hybrid is the square 4 port type, you can > > >probably move it to the ham band without trouble. > > > > > >If your hybrid network is a cable type, your going > > >to have problems with preformance in the amateur > > >bands. > > > > > >cheers, > > >skipp > > > > > >www.radiowrench.com/sonic > > >skipp025 at yahoo.com > > > > > >>James <[EMAIL PROTECTED]> wrote: > > >>I have recently acquired a transmitter combiner (currently > > >>tuned for two 460 MHz channels that are 25 KHz apart). This > > >>unit contains the following parts (All decibel products). > > >>Circulators (appear to be narrow bandwidth) #DB4632-2D, > > >>Harmonic filters # DB4332-A, and the combiner DB4308. I > > >>am looking for the tuning instructions for this > > >>unit to move it into the ham band. The unit does not have a > > >>package part number on it. Can anyone help with information > > >>on this?? All the parts I have listed have the ability to be > > >>tuned. > > >>James > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
