Correction: Depending on the band the base station is on, the PA may be continuous or intermittent duty. It does not necessarily follow what type of chassis it is.
John At 01:02 PM 12/5/03, you wrote: >Jim, > the base with the flex cable is called a non-unified chassis. It has a >separate control shelf (back plane). > >The other type is a unified chassis. Unified chassis' are generally not >continuous duty, They utilize >a mobile style heat sink. > >A unified chassis has the control shelf between the exciter and receiver >interconnect boards. >The units shipped as repeaters have additional filtering on the >interconnect boards for duplex operation. > >The non-unified units have an additional filtering shield that attaches >between the flex and the >interconnect boards. > >John > > >At 12:26 PM 12/5/03, Jim Cicirello wrote: > >Hello to Kevin and the group: > > > >Can you tell me if the difference in the physical appearance of the > >backplanes on the Micor Base Stations effect the conversion > >instructions posted on this site? > >I am referring to the difference in appearance between two Micor > >Units I have looked at. One has the backplace in the center and I am > >told that is a Cont. Duty Base. The other Micor Base has ribbon cable > >from the TX to the RX to the Backplane. The backplanes is on the > >bottom of the cabinet and is much shorter in height. > >Will the same conversion instructions posted apply to both backplains? > > > >Thanks and 73 > > > >JIM KA2AJH > > > > > > > > > > > > > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
