Jay: There are lots of special versions out there, but the standard PAC RT was used with a mobile radio to create an in car cross band repeaters. Depending on the version, and the mobile it was interfaced with, it typically hooked to a Micor or Syntor (or lots of others) mobile radio on Low Band, then the officer would carry a high band radio. When he/she got out of the car they would turn on the repeater which would allow them to talk on 154.695 with a PL tone, and it would key the car radio. Anything received on the car radio would be broadcast back out on 154.695 carrier squelch, but the PAC RT would drop ever couple of seconds for a few milliseconds to listen for a response from the officer. The RT versions also had special signaling between the units so if more than one was at a scene only one would be active.
Not really very useful in the standard configuration, the RF was based on a portable radio, and only ran 2 watts or less for most units. You might be able to use the RF if you were building something for low power, but if you're planning a 100 watt, I'm guessing you've got AC power, and the PAC RT RF probably wouldn't be the best option. Hope this helps. Chuck n0nhj Grand Junction, CO [EMAIL PROTECTED] wrote: >Hello everyone, > I am a newbie here, I admit it, I know knowthing! So please dont >make fun of me. I have been a No-Code Tech for almost 12 years, but >never really learned much. Now here is where I need help, I want to >setup a 100 watt repeater near my camp . I have a Motorola Fm Mobile >Repeater Radio PAC-RT and the key that opens the case. I have no >wires or instructions. On one side it says it is on a frquency of >154.695, I know this is a State Police frequency in most states so I >cant use it as is. Inside it has a label with "Recvr1 42.74". Could >you please tell me what I have and is it possible to reprogram this >to a different frequency in the 154.*** band Transmit and Receive. Or >do I have junk and forget about it. Thank you in advance. > >Dad1Boy1Girl >Jay >n2orw > > > > > > > > >Yahoo! Groups Links > >To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > >To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > >Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > > > > Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
