Not if you are using BpBr filters to start out with.

 

 

Gregg R. Lengling, W9DHI, Retired
Administrator http://www.milwaukeehdtv.org
K2/100 S#3075 KX1 S# 57
Politics is the art of appearing candid and completely open, while concealing as much as possible.   -States: The Bene Gesserit View

-----Original Message-----
From: David Malicki [mailto:[EMAIL PROTECTED]
Sent: Friday, December 19, 2003 10:57 AM
To: [email protected]
Subject: RE: [Repeater-Builder] use of Bp/Br duplexer as 2 channel combiner

 

Okay....I would assume that it would be necessary to add Babdpass filters additionally after the circulators

>From: "Gregg Lengling"

<[EMAIL PROTECTED]>

>Reply-To: [email protected]

>To:

>Subject: RE: [Repeater-Builder] use of Bp/Br duplexer as 2 channel combiner

>Date: Fri, 19 Dec 2003 10:44:58 -0600

>MIME-Version: 1.0

>X-Sender: [EMAIL PROTECTED]

>Received: from n8.grp.scd.yahoo.com ([66.218.66.92]) by mc7-f8.hotmail.com with Microsoft SMTPSVC(5.0.2195.6713); Fri, 19 Dec 2003 08:45:30 -0800

>Received: from [66.218.67.200] by n8.grp.scd.yahoo.com with NNFMP; 19 Dec 2003 16:45:09 -0000

>Received: (qmail 4972 invoked from network); 19 Dec 2003 16:45:08 -0000

>Received: from unknown (66.218.66.217)  by m8.grp.scd.yahoo.com with QMQP; 19 Dec 2003 16:45:08 -0000

>Received: from unknown (HELO smtp811.mail.sc5.yahoo.com) (66.163.170.81)  by mta2.grp.scd.yahoo.com with SMTP; 19 Dec 2003 16:45:08 -0000

>Received: from unknown (HELO DESK) ([EMAIL PROTECTED]@68.21.198.123 with login)  by smtp811.mail.sc5.yahoo.com with SMTP; 19 Dec 2003 16:45:08 -0000

>X-Message-Info: JGTYoYF78jHcTHAzELJgqmt+KOAfstCk

>X-eGroups-Return: [EMAIL PROTECTED]

>X-Apparently-To: [email protected]

>Message-ID: <[EMAIL PROTECTED]>

>X-MSMail-Priority: Normal

>X-Mailer: Microsoft Outlook, Build 10.0.4510

>X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2800.1165

>In-Reply-To:

<[EMAIL PROTECTED]>

>X-eGroups-Remote-IP: 66.163.170.81

>X-Yahoo-Profile: glengling

>Mailing-List: list [email protected]; contact [EMAIL PROTECTED]

>Delivered-To: mailing list [email protected]

>Precedence: bulk

>List-Unsubscribe:

>Return-Path: [EMAIL PROTECTED]

>X-OriginalArrivalTime: 19 Dec 2003 16:45:30.0453 (UTC) FILETIME=[8353D050:01C3C64F]

>

>We Have two repeaters at one location using two antennas and 2 duplexers,

>but because of the high-powered UHF paging TX we got too much desense on the

>top antenna for receive so we split to make the top TX only and the lower RX

>only.  We had 2 micor stations with 2 TX/RX duplexers.  By retuning the

>notches and then combining the RX cavities from each duplexer to the lower

>antenna and combing the output of the TX cavities to the top antenna we

>ended up with an excellent system.  However if you are running a station

>that doesn't already have a circulator (it's integral in the micor 70 watt

>stations, one of ours was a 250 watt micor, so we added a circulator to the

>output) you will need to add the circulators to avoid mixing in the amps

>between the two transmitters.

>

>

>Gregg R. Lengling, W9DHI, Retired

>Administrator http://www.milwaukeehdtv.org

>K2/100 S#3075 KX1 S# 57

>Politics is the art of appearing candid and completely open, while

>concealing as much as possible.   -States: The Bene Gesserit View

>

>

>

>-----Original Message-----

>From: n1ofj [mailto:[EMAIL PROTECTED]

>Sent: Friday, December 19, 2003 9:40 AM

>To: [email protected]

>Subject: [Repeater-Builder] use of Bp/Br duplexer as 2 channel combiner

>

>Has anyone ever used a Bandpass/reject duplexer as a transmit

>combiner. As an example, using one port set up as a pass on Frequency

>A, reject on frequency B, and the other port to reject frequency A

>and pass Frequency B?  Any thoughts on this would be appreciated.

>Thanks,

>Dave N1OFJ

>

>

>

>

>

>

>

>Yahoo! Groups Links

>

>To visit your group on the web, go to:

>  http://groups.yahoo.com/group/Repeater-Builder/

>

>To unsubscribe from this group, send an email to:

>  [EMAIL PROTECTED]

>

>Your use of Yahoo! Groups is subject to:

>  http://docs.yahoo.com/info/terms/

>

>

>

>

>

>

>

>

>Yahoo! Groups Links

>

>To visit your group on the web, go to:

>  http://groups.yahoo.com/group/Repeater-Builder/

>

>To unsubscribe from this group, send an email to:

>  [EMAIL PROTECTED]

>

>Your use of Yahoo! Groups is subject to:

>  http://docs.yahoo.com/info/terms/

>

>



Make your home warm and cozy this winter with tips from MSN House & Home.






Yahoo! Groups Links

·         To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
 

·         To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
 

·         Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.










Yahoo! Groups Links

Reply via email to